FOXBORO Conductivity Meter 875CR-B1F

FOXBORO is now a brand of Schneider in France, which mainly manufactures instruments for industrial control and process automation.

Schneider Electric (French: Schneider Electric) was founded in 1836, is a large energy management company, one of the optimization solutions provider, the main products include circuit breakers, sensors, controllers, etc., for the countries energy facilities, industry, data centers and networks, buildings, to provide total solutions. In the energy, infrastructure, industrial process control, building automation, data centers and networks and other markets are involved.

FOXBORO main products: sensors, circuit breakers, control valves, actuators, converters, relays, controllers, recorders and indicators, thermocouple bushings, DEWCEL dew-point meters, filter regulators, pneumatic transmitters and so on.

FOXBORO conductivity meter technical parameters

875CR-B1F

Contacting Conductivity and Resistivity Intelligent Electrochemical Analyzer

875CR

Supply Voltage and Frequency:220V ac,50 or 60 Hz

-Enclosure Mounting:Panel Mount

Enclosure Mounting:Panel Mounting -Standard Construction(C) 1

Electrical Safety:FM, Ordinary and Division2 Locations,NI(C) F

FOXBORO conductivity meter 875CR series introduction

The 875CR contact conductivity/resistivity analyzer is one of a series of power analyzers. It receives conductivity or resistivity measurements from the measurement sensor and provides information via the front panel display, integrated dual analog (4 to 20 mA) outputs, optional digital communication port and dual alarm outputs.

The analyzer is available in panel, pipe and surface mount versions. The panel mount version is rated for NEMA Type 1. However, it meets the requirements of NEMA Type 4X when the front panel is mounted in a panel and secured in place with the supplied gasket. The ducted and surface-mounted versions are dust and weatherproof according to IEC IP65, and offer the environmental and corrosion protection of NEMA Type 4X. The 875CR analyzer is also designed to meet the electrical safety requirements of major test laboratories.

The integrated display consists of a 240 x 128 pixel backlit liquid crystal display (LCD). Various pixel combinations create text and symbols for the entire front panel operating mode.

FOXBORO Conductivity Meter 875CR Series Options

MODEL CODE

Description

Contacting Conductivity and Resistivity

Contacting Conductivity and Resistivity Intelligent Electrochemical Analyzer

875CR

Supply Voltage and Frequency

120V ac, 50 or 60 Hz (a)

ABCEJD

220 V ac,50 or 60 Hz

240 V ac, 50 or 60 Hz

24 V ac, 50 or 60 Hz

100 V ac, 50 or 60 Hz

24 V dc (b)

Enclosure Mounting

Panel Mounting -Standard Construction(c) 1234

Field Mounting to a DN50 or 2-in Pipe- Standard Construction

Field Mounting to a Surface,with standard mounting bracket -Standard Construction

Field Mounting to a Surface, with reinforced standard mounting bracket -Rugged Construction

Electrical Safety (also see "Electrical Safety Specifications" section)

CSA,Ordinary and Division 2 Locations,NI (c) CRFDU

EAC,protection n for Zone 2; Ex nA nL nC [nL] IIC

FM, Ordinary and Division 2 Locations,NI (c)

IECEx protection n for Zone 2; Ex nA nL nC [nL] IIC

UL (Underwriter's Laboratory)Ordinary Locations

Optional Selections

Storm Door

Digital HART Communication and 4 to 20 mA Output

Rugged Construction, shock and vibration, with 4 to 20 mA Analyzer Outputs (a)

Rugged Construction, shock and vibration, with 0 to 10 V Analyzer Outputs (a)

Example: 875CR-A3F-A;875CR-B2C-AC

a.The rugged construction options -N and -P are available only with:

- Supply voltage Code -A (120 V ac,50 or 60 Hz)

-Enclosure Mounting Code 4(field-mounted enclosure with reinforced mounting bracket).

b.The 24 V dc power selection provides a volts dc four-wire analyzer (it is not a loop powered 4 to 20 mA device).

c. Panel mounted unit must be installed as follows:

For Ordinary, and Class I, Division2 locations: install in a protective enclosure to help prevent accessibility to live parts.

For Class II,and Class III, Division 2 locations: install in a dusttight enclosure.

NOTE: The enclosures above must meet the ingress protection level required by the application, up to NEMA 4X or IP65.