ABB AX460/50001 pH/Redox Meter Model Type AX400

ABB AX460/50001 Single And Dual Input Analyzer For pH/Redox Display Unit.The pH / Redox (ORP) Analyzer AX460 is used with glass, enamel and antimony pH electrodes and metal redox sensors. 

Description of ABB AX460/50001 pH/Redox Meter

Model Type: AX400

Single And Dual Input Analyzer For pH/Redox Display Unit

Manufacturers: ABB

Additional Information Panel-Mount

Estimated Shipping Size: Dimensions: 3.3" x 3.3" x 6.3" (8.3 cm x 8.3 cm x 15.9 cm)

Weight: 1 lbs 7.8 oz (0.7kg )

Technical information of ABB AX460/50001

Inputs

• One or two* pH or mV inputs and solution earth

• One or two* temperature sensors

• Enables connection to glass or enamel pH and reference sensors and Redox (ORP) sensors

Input resistance

• Glass >1 x 1013Ω

• Reference 1 x 1013Ω

Range

–2 to 16 pH or –1200 to +1200 mV

Outputs

Number of current outputs (fully isolated)

Two supplied as standard or four with option board fitted

Output ranges

• 0 to 10, 0 to 20 or 4 to 20 mA

• Analog output programmable to any value between

0 and 22 mA to indicate system failure

Accuracy

±0.25 % FSD, ±0.5 % of reading (whichever is the greater)

Wall- / Pipe-mount versions

• IP65 (not evaluated under UL certification)

• Dimensions 192 mm high x 230 mm wide x 94 mm deep (7.56 in. high x 9.06 in. wide x 3.7 in. deep)

• Weight 1 kg (2.2 lb.)

Panel-mount versions

• IP65 (front only)

• Dimensions 96 mm x 96 mm x 162 mm deep (3.78 in. x 3.78 in. x 6.38 in. deep)

• Weight 0.6 kg (1.32 lb.)

Operating temperature limits：–20 to 55 °C (–4 to 131 °F)

Storage temperature limits： –25 to 75 °C (–13 to 167 °F)

The complete range encompasses solutions for pH/Redox (ORP), conductivity and dissolved oxygen. AX46x analyzers enable continuous measurements of one or two pH or Redox (ORP) points with simultaneous local display and retransmission. AX46x is used with glass, enamel and antimony pH electrodes and metal Redox sensors, providing measurements with exceptional accuracy and performance. AX400 series analyzers are available for either wall-/pipe- or panel-mounting and are rated to IP65.