Sick Wire-pull encoder HighLine PRF13-A1AM2020

Sick Wire-pull encoder HighLine PRF13-A1AM2020

measuring range:0 m ... 2 m

encoder:incremental encoder

resolution (cable pull + encoder):0.02 mm 1) 2)

repeatability:≤ 1 mm 3)

linearity:≤ ± 2 mm 3)

hysteresis:≤ 2 mm 3)

communication interface:Incremental / TTL / RS-422

Programmable/Parameterizable:?

factory settings:The installed DFS60 encoders are programmed at the factory to the specified number of lines and interface. Using our separately available programming devices for DFS60 encoders, the electrical interface (TTL/HTL) and the number of lines (up to a maximum of 10,000 lines) can be set according to customer requirements.

connection type:connector, M23, 12-pin, radial

supply voltage:4.5 V ... 5.5 V

power consumption:≤ 0.7 W (without load)

MTTF d : Time to dangerous failure:300 years (EN ISO 13849-1) 1)

Weight:1.6 kg

material, measuring rope:Highly flexible steel wire 1.4401 stainless steel V4A

measuring rope diameter:1.35 mm

weight (measuring rope):7.1 g/m

Material, housing cable mechanism:aluminum (anodized), die-cast aluminum (nickel-plated)

spring return force:6 N ... 14 N 1)

cable extension length per revolution:200 mm

service life of the cable mechanism:Typ. 1,000,000 cycles 2) 3)

Actual cable extension length:2.2 m

rope acceleration:40 m/s2

adjustment speed:8 m/s

Mounted encoder:DFS60, DFS60B-S1MA10000, 1056866

Attached mechanics:MRA-F080-102D2, 6028625

EMC:According to EN 61000-6-2 and EN 61000-6-3

protection class:

IP64, built-in mechanics

IP67, Encoder (IEC 60529) 1)

operating temperature range:–30 °C ... +70 °C