Hontko HLS-S-10-01A-H Linear wire encoder

Hontko HLS-S-10-01A-H Linear wire encoder

HLS-S series is an incremental wire-drawn encoder suitable for measuring shorter strokes.

Measurement stroke: 1000mm; Resolution: 1/0.1/0.04 mm/pulse; Output signal form: ABZ three-phase;

Maximum response frequency: 100kHz; Maximum round-trip speed: 1000mm/s;

Output form: push-pull output, line drive output; Output voltage: DC 5-26V;

Protection level: IP50; Ambient temperature: 0 ~ +60℃;

Specifications of Hontko HLS-S-10-1A-P Linear wire encoder;

Measuring Range: 1000 mm; Resolution: 1 / 0.5 / 0.2 / 0.1 / 0.04 mm /pulse;

Features of Hontko HLS-S-10-01A-H

Suitable for short measurement range; ELECTRICAL SPEC.

Detection System: Incremental; Output Wave: Square Wave;

Stroke (mm): 1000;Standard Resolution (mm/pulse): 1, 0.5, 0.2, 0.1, 0.04 mm/pulse;

Repeatability Error: ±0.05% FS, ±1 count; Output Phase: ABZ phase;

Electronics Push: Pull or Line Driver; Power Supply: DC 5~26V;

Current Consumption: ≤ 60 mA; Output Capacity: Sync. Current: 20 mA, Residual Voltage: 0.5V or less;

Max. Response: Max. 100K Hz;

Phase Different: A, B phase different 90°±45° (T/4±T/8), Z phase T±T/2 Wave Form Rise / Fall;

Polarity: Against Reverse Protection; MECHANICAL SPEC.

Wire Specification: Material: SUS304 with nylon coating Diameter: 0.6 mm; Breaking load: 16 Kg

Max. Travel Speed: 1,000 mm / sec.; Vibration: Max. 10g (10 ~55 Hz / 1.5 mm X.Y.X. 2Hr);

Shock: 20g per 11 ms; Cable: ?4.5, 50 cm long; Weight: < 450g;

Starting Torque on Spring Max. 700 g;

ENVIRONMENTAL SPEC.;

Operating Temp. / Humidity: 0°C ~ 60°C, RH 35% ~ 90% (No Condensation) Storage Temp.: -20°C ~ 70°C

Protection: IP50: Dust Proof (only for encoder housing); Life: Typical > 1 X 106 cycles