Eaton Drive Cutler Hammer W200M6CFC NEMA Contactor Starter

The W200M6CFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive within the W200 series. It has a motor voltage of 200 and a maximum horsepower of 1. The enclosure size must be 1, and the coil voltage is approximately 120. Operating at around 60 Hertz, this module is a 3 - phase unit with 3 poles.

The Eaton W200M6CFC is an Advantage non - reversive motor starter primarily designed to regulate the performance of a 3 - phase electric motor. This controller, usually used with 3 - phase motors, is designed by Eaton Cutler - Hammer. The Eaton Cutler - Hammer W200M6CFC Advantage non - reversive motor starter has the NEMA 6 frame and is one of the top - rated motors in the series due to its size and performance. It offers an amperage rating of 540 continuous Amps, a coil voltage of 120 Volts, and a frequency of 60 Hertz.

Among the functions provided by the Eaton Cutler - Hammer W200M6CFC Advantage non - reversive motor starter are various methods for starting and stopping the motor, options for selecting and regulating motor speed or torque, as well as protection against motor overload, phase imbalance, and phase loss scenarios.

It is recommended to install the Eaton Cutler - Hammer W200M6CFC Advantage non - reversive motor starter in an environment with a maximum temperature rating of 40 degrees Celsius and a maximum altitude of 2000 meters. The installation area should be clean, free from liquids and corrosive materials. The Eaton Cutler - Hammer W200M6CFC Advantage non - reversive motor starter comes with diverse communication options. A DeviceNet technology module can be inserted into the controller to enable communication and data transfer between different pieces of equipment.