Welcome to CW Green Tech Limited
[email protected] 86-136 6712 1125
Home      Products Eaton Drive Cutler Hammer W200M3CFC starter
Eaton Drive Cutler Hammer W200M3CFC starter

Eaton Drive Cutler Hammer W200M3CFC starter

  • Product Item : W200M3CFC
  • Product Brand : Eaton
  • INQUIRY

The Eaton W200M3CFC starter is a non - reversing one that belongs to the Eaton Advantage Series. This series is made by Cutler - Hammer, which is a division of the Eaton Corporation. The Eaton Cutler - Hammer W200M3CFC non - reversing starter holds significant importance in various industries, especially when used with motors that need non - reversing control from the controller. It is also utilized with 3 - phase motors with voltages ranging from 200 to 575 Volts.


The Eaton Cutler - Hammer W200M3CFC non - reversing starter has a voltage rating of 120 Volts and a frequency rating of 60 Hertz. This controller operates at a continuous current rating of 90 Amps and has a Horsepower rating between 25 and 50 Horsepower.


The Eaton Cutler - Hammer W200M3CFC non - reversing starter features an open enclosure. This enclosure safeguards the essential wiring of the controller and also allows the controller to endure a higher temperature range compared to other controllers. This controller should not be in contact with liquids, and it should not be installed in highly corrosive environments, as these could impact the functioning of both the motor and the controller by causing wear to their external parts.

The Eaton Cutler - Hammer W200M3CFC non - reversing starter has a height of 8 inches, a width of 3.68 inches, and a depth of 6.54 inches. It also has an approximate shipping weight of 6 pounds. While in operation, this non - reversing starter can withstand a maximum temperature of 40 degrees Celsius and can operate at a maximum altitude of 6600 feet. If it is used at a higher altitude, derating of the controller might be necessary.

Alternative model names

W20OM3CFC

W2O0M3CFC

W2OOM3CFC