Cutler Hammer W200M1CNC NEMA Contactor Starter Eaton Drive

The W200M1CNC Cutler Hammer is an Eaton Drive that functions as a NEMA Contactor or Starter. It belongs to the W200 series, with a motor voltage of 230 and a maximum horsepower of 1. Its enclosure must be size 1, and the coil voltage is around 110. Operating at approximately 50 Hertz, this is a 3 - phase, 3 - pole unit.

Cutler Hammer W200M1CNC NEMA Contactor Starter Eaton Drive

The Eaton Cutler - Hammer W200M1CNC is an Eaton Advantage non - reversing motor starter. According to the Underwriters Laboratory rating, the starter has a continuous current rating of 27 Amps. The maximum voltage rating of the W200M1CNC is 600 Volts AC, and its coil voltage is 110 Volts with a frequency of 50 Hertz. When the input voltage is between 200 and 230 Volts AC, the W200M1CNC has a horsepower rating of 7.5. When the input voltage is between 460 Volts AC and 600 Volts, the starter has a 10 - horsepower rating. The motor starter has an open enclosure type. It features a solid - state overload relay. The W200M1CNC has 3 poles, and its control voltage is rated at 120 Volts AC with a frequency of 60 Hertz. The starter is designed for use with a motor having an FLA rating ranging from 3.43 Amps to 27 Amps.

Like other starters in the Eaton Advantage series, the W200M1CNC supports external communication devices such as the WPONIDNA DeviceNet Communication Module. This module is specifically designed to interface with Eaton Advantage starters. It uses a cable that is permanently attached to the module but free on the other end to connect to the W200M1CNC. The DeviceNet module can be attached to the top of the W200M1CNC or mounted separately using the WPONIBASE mounting plate assembly. The module connects the W200M1CNC, or any other Advantage starter, to a DeviceNet network. The W200M1CNC also has features that allow it to detect motor overloads.