Eaton Cutler Hammer W200M1CFC Soft Starter

The Eaton / Cutler Hammer W200M1CFC is a Soft Starter compliant with NEMA 1, belonging to the advantage series. It is specifically a non - reversing magnetic motor starter and contactor. Solid - state current - sensing circuitry is installed within it, enabling the automatic detection of overload, phase loss, phase imbalance, and ground - current sensing. The overload capability of this starter features both automatic and manual reset, and it offers overload trip classes 10, 20, and 30.

Technical specifications for W200M1CFC

ManufacturerEaton

BrandCutler Hammer

Part Number/Catalog No.W200M1CFC

DescriptionNEMA 1 Starter

Product SeriesAdvantage series

Starter TypeNon-reversing

Coil Voltage120VAC, 60 Hz

Motor FLA3.15 A to 27 A

Power Rating7.5 Hp At 200/230 V 60 Hz; 10 Hp At 460/575 V 60 Hz

Overload Trip ClassClass 10/20/30

Overload resetManual and Automatic

Dimensions5.37 in (H) x 6.18 (W) x 9.18 in (D)

Weight3.1 lb.

Fault detectionOverload; phase loss; phase imbalance; ground-current sensing

MountingPanel Mount

The applicable motor Full Load Current (FLA) for the W200M1CFC ranges from 3.43 Amperes to 27.0 Amperes. It is equipped with eight (8) DIP switches, which are used to configure the starter's Overload setting, Overload protection class, and Automatic / Manual reset. In the case of manual reset, the reset button is positioned at the lower right area of the starter.

This starter has physical dimensions of 5.37 inches in height, 6.18 inches in width, and 9.18 inches in depth, and it weighs 3.1 pounds. It should be installed in an environment that has sufficient space for natural airflow and also provides adequate working space for troubleshooting and maintenance. It has the capability to provide full - voltage motor starting, as well as to start, stop, and interrupt the locked - rotor current of motors.