Eaton Drive W250MLCNC Cutler Hammer NEMA Contactor/Starter

Eaton Drive W250MLCNC Cutler Hammer NEMA Contactor/Starter 

The W250MLCNC Cutler Hammer is an Eaton Drive that serves as a NEMA Contactor or Starter. It's part of the W200 series, with a motor voltage of 230 and a maximum horsepower of 1. Its enclosure must be size 1, and the coil voltage is around 110. Operating at approximately 50 Hertz, this is a 3 - phase, 3 - pole unit.

Eaton/Cutler - Hammer, a diverse manufacturer of power and surge protection devices for the global industrial market, designed the W250MLCNC drive. The NEMA - marked enclosure indicates that it's a contactor/starter type drive, specifically a reversing (vertical) starter. Cutler - Hammer's electro - mechanical starters incorporate their proprietary Intelligent Technologies (IT). These consist of a contact block/contactor and a solid - state overload relay as a full - voltage reversing (FVR) device.

The Eaton W200 product series drives have several features. A Unique Pulse Width Modulated (UPWM) coil controller greatly reduces coil power consumption. They have microprocessor - based control, ambient - compensated overload protection, can be panel - mounted using mounting feet, have LED status indicators, and offer user - selectable functions like phase loss and current unbalanced protection, as well as a manual/automatic/remote reset function.

Specification of Eaton Drive W250MLCNC Cutler Hammer NEMA Contactor/Starter 

The W250MLCNC drive from the W200 series has a motor voltage of 230 Volts and a maximum power output of 1 Horsepower. This 3 - pole unit with a size 1 enclosure operates on 3 - phase power. Its coil voltage is 110 Volts, and the operating frequency is 50 Hertz. The operating temperature range for the W250MLCNC starter and similar devices in this series is - 40 to 65 degrees Celsius (- 40 to 149 degrees Fahrenheit). The device generates minimal heat and doesn't have full - voltage coils. This compact drive measures 114 millimeters (4.5 inches) in width, 149 millimeters (5.9 inches) in length, and 67 millimeters (2.6 inches) in depth. The mounting hole spacing for the reversing starter drive is 80 x 136 millimeters (3.15 x 5.35 inches). The drive weighs 0.9 kilograms or 2 pounds.