ABB TB82TC series conductivity transmitter

Product Item : TB82TC series
Product Brand : ABB
INQUIRY

Product Description
Other Models

The TB82TC Series is a 2-wire, 4 to 20 mA compatible conductivity/concentration transmitter with state-of-the-art electronics, internal and external diagnostic functionality, innovative user interface having SmartKey capability, two userselectable modes of operation, and DIN size packaging.

The TB82TC Toroidal Conductivity FOUNDATION Fieldbus (FF) Transmitters are a modular range of field mounted, microprocessor-based instruments.

Accurate and reliable measurement of solution conductivity is provided, in the even most difficult and hazardous industrial environments.

The TB82 family of transmitters offers Analog (4-20mA output), Analog with HART digital communication, Profibus PA, and FOUNDATION Fieldbus product versions.

This manual describes the features, installation requirements, configuration commissioning, and calibration procedures related to the TB82TC Toroidal Conductivity FF Transmitter.

Refer to the supplementary documentation section to obtain additional information on the FOUNDATION Fieldbus communication protocol and device installation.

The following is the parameter information of ABB TB82TC series conductivity transmitter:

Input type: Applicable to toroidal (electrodeless) conductivity sensors, used with ABB's TB404 series toroidal conductivity sensors.

Digital communication options: Can choose none (analog only), HART, Foundation Fieldbus, PROFIBUS PA and other communication methods.

Ambient temperature: operating temperature is -20℃ to 60℃ (-4℉ to 140℉), LCD screen operating temperature is -20℃ to 60℃ (-4℉ to 140℉), storage temperature is -40℃ to 70℃ (-40℉ to 158℉).

Humidity: Relative humidity up to 95%.

Enclosure: NEMA 4X and IP65 rated, anodized aluminum polyester powder coating, dimensions 144.0mm × 144.0mm × 171.0mm (H × W × D), 5.67 in × 5.67 in × 6.73 in.

Weight: Approximately 1.9 kg (4.2 lbs); 3.4 kg (7.5 lbs) with conduit mounting hardware.

Conduit Connections: 2 22.2 mm (0.875 in) holes in enclosure to accept 1/2 hub.

Lightning Arrester: Installed on transmitter to suppress lightning induced transients, tested to suppress 10 consecutive 8/20μsec pulses with a peak of 20kA (referenced to IEEE C62.41).

Power Requirements: 14.0 to 53V DC standard (14.0 to 42V DC for certified applications); 14 to 53V DC for HART (14 to 42V DC for certified applications), a 250Ω resistor is required for HART communications, 19V DC required, 14V DC boost required; 9 to 32V DC for Foundation Fieldbus and PROFIBUS PA bus power (non-I.S. models), 9 to 24V DC (I.S. models), 15mA quiescent current draw.

The model of ABB TB82TC series conductivity transmitter usually consists of numbers and letters, and each character represents a different meaning. The following are some common models and their meanings:

TB82TC1110101: Generally speaking, "TB82" indicates the series of the transmitter; "TC" represents the input type of the toroidal (electrodeless) conductivity sensor; the first "1" may indicate basic programming options; the second "1" indicates that the digital communication option is HART; the third "1" indicates that a lightning arrester is included; the following "0101" may be other specific configuration or version information.

TB82.TE.2.1.1.0.3.3: “TB82” is the serial number; “TE” indicates 2-electrode input type (different here from TC, another configuration for conductivity transmitters); “2” represents advanced programming options; the first “1” indicates digital communication option is None (analog only); the second “1” indicates inclusion of a lightning arrester; the “0” may be a housing type related option; the “3” indicates agency approval as ATEX/IECEx; and the final “3” may be some other specific configuration or version number.