Welcome to CW Green Tech Limited
[email protected]
86-136 6712 1125
The Foxboro IAP10 is an intelligent 2-wire transmitter that provides precise and reliable measurement of Absolute pressure. It can be purchased with HART, FoxCom or analog outputs. I/A Series Intelligent Pressure Transmitters - IAP10 Absolute Pressure and IGP10 Gauge Pressure with HART Communication - Installation, Operation, Calibration, Configuration, and Maintenance.The Foxboro IAP10 series is a compact and robust absolute pressure transmitter for direct process mounting. The IAP10 series is available in different measuring ranges of 2.1 bar, 21 bar and 210 bar absolute pressure. As signal output you can choose 1-5V, 4-20 mA, Hart, Foudation Fielbus and FoxCom. The IAP10 series is available in a safe area version or explosion-proof version according to ATEX, IECex, FM or CSA.
Features & Benefits of The Foxboro IAP10
Compact and Rugged 316 SST construction
Superior Performance- Accuracy of 0.2% of span including hysteresis, linearity and repeatability.
Stability- Long term drift is less than ±0.05% of URL per year over a 5-year period.
Convenience- Can be configured directly from local display or with communicator for HART and FoxCom transmitters.
Influence
Sensor Body Temperature (a)
Silicone Fill Fluid
Fluorinert Fill Fluid
Neobee Fill Fluid pvdf inserts
Electronics Temperature With LCD Display
Relative Humidity
Supply Voltage
Output Load (d)
Mounting Position No Limit
Operative Limits
-46 and +121°C (-50 and +250°F)
29 and +121°0 (-20 and +250°F)
-18 and +121°0 (0 and 250°F)
-7 and +82°C (20 and 180°F)
-40 and +85'C (-40 and +185°F)(b)
-40 and +85'C(-40 and +185°F)@
0 and 100%；11.5 and 42 V dc；0 and 1450 ohms
Vibration
6.3 mm (0.25 in) double amplitude from 5 to 15 Hz with aluminum housing and from 5 to 9 Hz with 316 ss housing.
0 to 30 m's (0 to 3 'g") from 15 to 500 Hz with aluminum housing and 0 to 10 m's (0 to 1 'g") from 9 to 500 Hz with 316 ss housing.
The IAP10-T Intelligent Pressure and IGP10-T Intelligent Gauge Pressure Transmitters measure pressure by applying pressure to a silicon strain gauge microsensor within the sensor assembly. The microsensor converts the pressure to a change in resistance and the change in resistance to a 4 to 20 mA or digital signal proportional to the pressure. This measurement signal is transmitted to a remote receiver via two identical wires that power the transmitter electronics. These wires also transmit a bi-directional data signal between the transmitter and the remote communication device.
The transmitter allows a direct analog connection to a common receiver while still providing full smart transmitter digital communication using the HART Communicator.
The transmitter can be supplied with either a direct connection pressure seal or a remote pressure seal.
FOXBORO IAP10ST22B05AAM2L1B1Z1S2
FOXBORO IGP10-T22D1F-M1L1
foxboro igp10-t22e1f-m1l1
FOXBORO IGP10-A22D1F-M1L1
FOXBORO IGP10-T22C1F-M1L1
FOXBORO IGP10-A22E1F-M1
Foxboro IGP10-D22c1f-m1
PSFLT Flanged, Direct Connect (Flanged Level), Flush or Extended Diaphragm ANSI Class 150/300/600 flanges and BS/DIN PN 10/40, 10/16, 25/40 flanges
PSFAD Flanged, Direct Connect, Recessed Diaphragm ANSI CLass 150, 300, 600, 1500 flanges
PSFFD Flanged, Direct Connect, Flush Diaphragm (IAP10 and IGP10 only ANSI Class 150, 300, 600 and PN 10/40
PSTAD Threaded, Direct Connect, Recessed Diaphragm 1/4, 1/2, 3/4, 1, or 1 1/2 NPT internal thread
PSISD In-Line Saddle Weld, Direct Connect, Recessed Diaphragm Lower housing of seal is in-line saddle welded to nominal 3- or 4-inch (and larger) Pipe
PSSCT Sanitary, Direct Connect (Level Seal), Flush Diaphragm Process Connection to Sanitary Piping with 2- or 3- inch Tri-Clamp
PSSST Sanitary, Direct Connect (Level Seal), Extended Diaphragm Process Connection to 2-in Mini Spud or 4-in Standard Spud; Tri-Clamp Remote Mount, Capillary-Connected Pressure Seal Assemblies
PSFPS Flanged, Remote Mount, Flush Diaphragm ANSI Class 150/300/600 flanges and BS/DIN PN 10/40 flanges
PSFES Flanged, Remote Mount, Extended Diaphragm ANSI Class 150/300/600 flanges and BS/DIN PN 10/40, 10/16, 25/40 flanges
PSFFR Flanged, Remote Mount, Flush Diaphragm ANSI Class 150, 300, 600 flanges and DIN/BS PN 10/40
PSFAR Flanged, Remote Mount, Recessed Diaphragm ANSI Class 150/300/600/1500 flanges
PSTAR Threaded, Remote Mount, Recessed Diaphragm 1/4, 1/2, 3/4, 1, or 1 1/2 NPT internal thread
PSISR In-Line Saddle Weld, Remote Mount, Recessed Lower housing of seal is in-line saddle welded to nominal 3- or 4-inch (and larger) Pipe
PSSCR Sanitary, Remote Mount, Flush Diaphragm Process Connection secured with a Tri-Clamp to a 2- or 3-inch pipe
PSSSR Sanitary, Remote Mount, Extended Diaphragm Process Connection to 2-in Mini Spud or 4-in Standard Spud; Tri-Clamp
