Baumuller Nurnberg BUM60-12/24-54-B-001 314602 Servo Drive

Baumuller Nurnberg BUM60-12/24-54-B-001 314602 Servo Drive

The entire BUM 60 device consists of three parts: feed-in converter, motor-side inverter and controller module. This documentation does not cover the various controller modules, which are described in separate operating instructions.

The BUS 60 power module does not have the feed-in converter with inrush current limitation and the ballast circuit. The device only has a motor-side inverter and a controller slot. With this power module - in conjunction with devices that contain feed-in converters - multi-axis systems can be set up that enable energy exchange via the intermediate circuits.

Manufacturer: Baumuller Nurnberg

Type: Servo Drive

Model: BUM6012/2454B001

MNR: BUM60-VC-A0-0001

Part No.: 314602

Series: BUM60

Technical information of Baumuller Nurnberg BUM60-12

Input:

Rated Voltage: 3-Phase/400 … 480 V AC

Rated Current: 16 A

Frequency: 50/60 Hz

DC Link Capacitor: 220 µF

Output:

Rated Voltage: 3-Phase/ 0 … 390 V AC

Rated Current: 12 Aeff

Frequency: 0 … 300 Hz

Typical motor power: 4.5 kW

Output Power: 8 Kva

Power Loss: 170 W

Max. switch-on time / ratio: 1.5 s / 1 : 33

Protection Class: IP20

Operation Temperature: 0 … 45 °C

Dimensions: 108 x 315 x 270 mm

The installation consists of the following steps:

1 Connect the motor via terminals 1U2, 1V2, 1W2, PE.

Make sure the connection is in the correct phase (direction of rotation).

Observe the permissible torques!

2 Connect the device to the mains choke output via the mains input terminals 1U1, 1V1 and 1W1 - not for BUS 60.

3 Connect the protective conductor to the PE terminal (a fixed protective conductor connection is mandatory).

4 Connect the 24 V supply.

(if you take UL508C into account: limit the current to 4 A).

5 Connect the controller (see the controller operating instructions)

That the following product: