GE CL45 seires Contactor

Desription of GE CL45 Contactor

GE offers a line of 3 pole IEC and UL rated contactors that range from 5 H.P. @ 460volt up to 80 H.P. and accessories such as 4 pole auxiliary contact blocks and overload relays are available. Each contactor has the option to be mounted on the DIN rail or screwed to the base plate a panel for easy installation. 1 base contact (normally open) comes standard and each GE contactor has screw termination for easy wiring.

GE CL45 3 pole contactor is rated for 10 H.P. @ 230 volt, 25 H.P. @ 460 volt 3 Phase and has an AC coil (must specify coil voltage above). This 34 AMP GE contactor comes with line and load side coil connections, can be mounted on standard 35MM DIN rail and has screw terminals. Up to 4 top mounted single pole auxiliary contact blocks can be added along with 1 two-pole side mounted auxiliary and direct mount overload relays with adjustable AMP ranges to achieve maximum motor protec

Manufacturer:GENERAL ELECTRIC

Type of contactor: 3-pole

Contacts configuration: NO x3

Control voltage:230V AC

Max. operating current:40A

Mounting:for DIN rail mounting, on panel

Contactor series:CL

Leads:screw terminals

Switching capacity:18.5kW

Technical Specifications

• Broad line offers wide array of contactors to meet most application needs from 5-500 HP at 460 volts.

• Common snap in accessories gives greater design versatility with lower inventory. Overload relays available in class 10, 20, and 30 with four set 40 function.

• Manual reset only overload to meet automotive requirements

• Finger and back of hands protected for greater safety

• Available with Ring Terminal Connections

• AC and DC coils available for a wide range of voltages

• Pre-assembled reversing forms available