Yokogawa EJA118W-EMSA2AA-AA05-92DJ/FF1/D4 Differential Pressure Transmitters

EJA118W-EMSA2AA-AA05-92DJ/FF1/D4 | Yokogawa | Diaphragm Sealed Differential Pressure Transmitter (Flush Diaphragm Type)

Manufacturer : Yokogawa

Product No. : EJA118W-EMSA2AA-AA05-92DJ/FF1/D4

Product Type : Diaphragm Sealed Differential Pressure Transmitter (Flush Diaphragm Type)

Output Signal : E = 4 to 20 mA DC with digital communication (HART protoco)

Measurement span (capsule) : M = 2.5 to 100 kPa {250 to 10000 mmH2O}{10 to 400 inH2O}{25 to 1000 mbar}

Wetted parts material : S

[Diaphragm] : JIS SUS316L JIS

[Others] : SUS316L

Process flange rating : A2 = ANSI Class 300

Cover flange bolts material : A = JIS SCM435

Fill fluid : A

For general use (silicone oil)

[Process temp.] : -10 to 250 °C

[Ambient temp.] : -10 to 60 °C

A : Always A

Capillary length (m) : 05 = 5m

Installation : 9 = Horizontal impulse piping type, left side high pressure

Integral indicator : 2 = 1/2 NPT female, two electrical connections without blind plug

Integral indicator : D = Digital indicator

Mounting bracket : J = JIS SUS316 2-inch pipe mounting (flat type)

Factory Mutual (fm) : FF1 = FM Explosionproof Approval *1 *3 *4

Applicable standard: FM3600, FM3615, FM3810, ANSI/NEMA250

Explosionproof for Class I, Division 1, Groups B, C and D

Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G

Hazardous (classified) locations, indoors and outdoors (NEMA 4X)

Division 2, ‘SEALS NOT REQUIRED’,

Temp. Class: T6

Amb. Temp.: –40 to 60°C (–40 to 140°F)

Calibration units : D4 = M calibration (kgf/cm2 unit)

Weight : 17.3 Kg

Shipping Weight : 19 Kg