ABB AX410, AX411, AX416, AX450 and AX455 conductivity

ABB AX410, AX411, AX416, AX450 and AX455 Single and dual input analyzers for low level conductivity

100% New Original with very competitive price and One year Warranty

Description of ABB AX410, AX411, AX416, AX450 and AX455 series

Measurement made easy , More processing power, higher performance

Cost effective

• select one or two conductivity inputs or combine conductivity and pH/Redox (ORP) in one analyzer

• integral PID controller (AX410) Reduced installation cost

• easy access terminations; reduced panel space High functionality at minimum cost

• conductivity, resistivity, difference, ratio, % passage, % rejection and inferred pH calculations Expanded monitoring and control

• add-on option board provides a total of five alarm relays and four current outputs

• service logbook providing historical data Energy saving

• high visibility, backlit display with auto switch-off function Reduced yearly maintenance costs

• 30 V DC option negates the need for costly safety tests Wide range of applicability

• water and waste water treatment

• power, pure water

• semiconductors

• chemicals

• pharmaceuticals

• pulp & paper

The AX400 series

The AX400 analyzers incorporate the latest technology to provide highly reliable, flexible, feature-packed devices that satisfy a diverse range of process monitoring and control applications. The complete range encompasses solutions for pH/Redox (ORP), conductivity and dissolved oxygen. Models AX41x and AX45x enable continuous measurements of one or two low-level conductivity points with simultaneous local display and retransmission. The analyzers are used with ABB 2-electrode conductivity cells providing measurements with exceptional accuracy and performance.

AX400 Series analyzers are available for either wall-/pipe- or panel-mounting and are rated to IP65.

Specification of Conductivity – AX41x and AX45x

AX450 and AX455 USP <645> conductivity

AX450 and AX455 analyzers have been developed specifically with the guidance of major leading pharmaceutical manufacturers to produce a system fully compliant to USP<645>. The US Pharmacopoeia has replaced the off-line qualitative test of water impurities, such as chloride, with a composite in-line Stage 1 Test based on conductivity.

Certification

To conform to USP<645> the accuracies of the instrument display and the sensor’s cell constant are assured below specified limits. Each AX450 or AX455 analyzer and model

2278 cell is supplied with a traceable test certificate.

Revalidation facility

ABB provides a revalidation facility for the 2278 conductivity cell where the cell can be returned periodically for recertification of the cell constant. This quick turnaround facility fulfills the stringent certification requirements of today’s pharmaceutical industry.

Recording USP<645>

Two standard current outputs, or four (optional), enable both conductivity and temperature to be recorded externally as a permanent record of compliance.

Range

Programmable 0 to 0.5 to 0 to 10,000 µS cm –1 (with various cell constants)

Minimum span 10 x cell constant

Maximum span 10,000 x cell constant

Units of measure µS cm –1 , µS m –1 , mS cm –1 , mS m –1 , MΩ-cm and TD

Accuracy

Better than ±0.01 % of span (0 to 100 µS cm –1 )

Better than ±1 % of reading (10,000 µS cm –1 )

Operating temperature range –10 to 200 °C (14 to 392 °F)

Temperature compensation –10 to 200 °C (14 to 392 °F)

Temperature coefficient

Programmable 0 to 5 %/°C and fixed temperature

compensation curves (programmable) for acids, neutral

salts and ammonia Temperature sensor

Programmable Pt100 or Pt1000

Reference temperature 25 °C (77 °F)

Calculated variables – AX411

Ratio 0 to 19,999

Difference 0 to 10,000µS cm –1

Percent passage or rejection 0 to 100.0 %

Total dissolved solids 0 to 8,000 ppm

Inferred pH&p;nbs 7.0 to 10.0pH

(NH 3 -dosed systems) 7.0 to 11.0pH

(NaOH-dosed systems)* pH /Redox (ORP) – AX416

Inputs

• pH or mV input and solution earth

• Temperature sensor Pt100, Pt1000 or Balco 3k

• Enables connection to glass or enamel pH and

reference sensors and Redox (ORP) sensors

Input resistance

• Glass >1 x 10 13 Ω

• Reference 1 x 10 13 Ω

Range

–2 to 16 pH or –1200 to +1200 mV

Minimum span

Any 2 pH span or 100 mV

Resolution

0.01 pH

Accuracy

0.01 pH

Temperature compensation modes

• Automatic or manual Nernstian compensation:

range –10 to 200 °C (14 to 392 °F)

• Process solution compensation with configurable

coefficient: range –10 to 200 °C (14 to 392 °F),

adjustable –0.05 to 0.02 %/°C (–0.02 to 0.009 %/°F)

Temperature sensor

Programmable Pt100, Pt1000 or Balco 3kΩ

The AX400 series conculde AX410 series, AX411 series, AX416 series, AX450 series and AX455 series.

Model Numbers about ABB AX410, AX411, AX416, AX450 and AX455 series:

AX410/10001;AX410/50001;AX410/100010/STD;AX411/10001;AX411/500010/STD;

AX416/10001;AX416/50001;AX430/10001;AX460/10001;AX411/10001;

AX431/10001;AX461/10001;AX413/10001;AX433/10001;AX463/10001;

AX436/10001;AX466/10001;AX410/20001;AX430/20001;AX460/20001;AX410/15001;

AX430/15001;AX460/15001;AX410/16001;AX430/16001;AX460/16001;

AX416/50001;AX410.2.0.0.0.1;AX400-0295;AX400-0365;AX410/1000C;AX410/10101;

AX410/50001;AX410/5000C;AX410/5200C;AX410/500010/STD;AX416/50001;

AX430/1000C;AX430/5000C;AX430/20001/STD;AX433/11001;AX460/10001;

AX460/1000C;AX460/10101;AX460/2000C;AX460/5000C;AX460/5200C;AX466/1000C;

AX466/5000C;