Fluke 718 - 300G Pressure Calibrator

Fluke 718 - 300G Pressure Calibrator

Pressure Calibrator -12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa )

New 1 and 300 PSI pressure ranges mean fewer extra tools required

Min/Max/Hold to capture changing measurements

Error % calculation for quicker pass/fail decision making in the field

Switch test feature for quicker and more accurate pressure switch testing

1, 30, 100 300 PSI ranges now available

The new Fluke 718 is a uniquely protected pneumatic pressure calibrator and pump. The new pump design uses protective check valves that allow air to pass through the pump for calibration but inhibits fluids from entering the pump and causing damage. These two check valves allow the bi-directional flow of air into or out of the 718. Even after draining the process fluid from the calibration port of the device under test, minute amounts of process fluids may often still be lurking behind. In the event these fluids enter the 718 pump cavities, the new pump design enables quick cleaning and maintenance, even in the field.

The Fluke 718 pressure calibrator family (4 models) provides a total pressure calibration solution for transmitters, gauges, and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique, easy to clean out access ports built into the pump to protect the pump from fluids and provides the ability to service the pump without disassembly.

Pressure Source and Milliamp Measurement to calibrate and maintain almost any pressure device

Integrated pump is easily cleaned when accidentally exposed to fluids:

Reduces cost of ownership and repairs

Service the pump in the field

Error % calculation for quicker pass/fail decision making in the field

Best in class mA accuracy of 0.015 % for better measurement confidence and workload coverage

Min/Max/Hold to capture changing measurements

Switch test feature for quicker and more accurate pressure switch testing

New 1 and 300 PSI pressure ranges mean fewer extra tools required

1, 30, 100 300 PSI ranges now available

718 Series

Measure Pressure (internal sensor)

Accuracy:0.05% full scale

Functions:zero, min/max, hold, damp

Note:Dry air, non-corrosives only

718 1G

Range:-1 PSI to +1 PSI, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)

Resolution:0.0001 psi, 0.001 mbar, 0.0001 kPa

Over Pressure:5x Full Scale

Functions:Zero, Min, Max, Hold, Damp

718 30G

Range:-12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa)

Resolution:0.001 psi, 0.1 mbar, 0.01 kPa

Over Pressure:5x Full Scale

Functions:Zero, Min, Max, Hold, Damp

718 100G

Range:-12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa)

Resolution:2x Full Scale

Functions:Zero, Min, Max, Hold, Damp

718 300G

Range:-12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa )

Resolution:0.01 psi, 1 mbar, 0.1 kPa

Over Pressure:375 PSI 25 bar

Functions:Zero, Min, Max, Hold, Damp

Fluke 718 series via using 700 Series Pressure Modules

Range:29 pressure modules, 0 – 1 in H20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs

Resolution:Per pressure module specs

Accuracy:To 0.025 % of full span, per pressure module specs

Functions:Zero, Min, Max, Hold, Damp

Note: media compatibility per pressure module specs

Fluke 718 series via built in pump

Range:-12 PSI or -850 mbar to full scale Supported Pressure Units; psi, in H20 (4 °C), in H20 (20 °C), cm H20 (4 °C), cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm

Loop Power:Range: 24 V dc

Accuracy: +/- 10 %

Note: Drive; 20 mA into 1000 O for battery ;6.8V; 700 O for battery 5.8 to 6.8 V

mA Measure:Range: 0 mA to 24 mA

Resolution: 0.001 mA

Accuracy: 0.015 % + 1 count

General Specifications

Maximum voltage 30 volts: Non-operating

Temperature-40 °C to 60 °C

Operating Temperature -10 °C to 55° C

Relative Humidity 95 % (10 °C to 30 °C); 75 % (30 °C to 40 °C); 45 % (40 °C to 50 °C); 35 % (50 °C to 55 °C)

Operating Altitude 3,000 M max

Shock 1 M drop test

Vibration Random, 2 g, 5 Hz – 500 Hz

Safety CSA C22.2 No. 1010.1: 1992

EMC EN50082-1: 1992 and EN55022: 1994 Class B

Size 216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in)

Weight 992 g (35 oz)

Power, battery life 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718

Battery Life 4 to 20 hours typical, depending on functions used