Welcome to CW Green Tech Limited
[email protected]
86-136 6712 1125
Bently Nevada143729-01Internal Terminations 3500/77M
The 3500/77M Recip Cylinder Pressure Monitor is a 4-channel monitor that accepts input from Bently Nevada approved pressure transducers, conditions the signal to make variouspressure measurements for reciprocating compressors, and compares the conditioned signals with user-programmable alarms.
The primary purpose of the 3500/77M monitor is to provide:l Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms.l Essential machine information for operations andmaintenance personnel.Depending on configuration, each channel typically conditions its input signal to provide various parameters called measured variables. Users can configure Alert setpoints for each active measured variable and Danger setpoints for any two of the active measured variables.
Each channel of the 3500/77M will provide eight measured variable values that relate to cylinder pressure operation. The five values that relate to a single chamber are as follows:
l Discharge Pressure
l Suction Pressure
l Maximum Pressure
l Minimum Pressure
l Compression Ratio
143729-01 Cylinder Pressure I/O Module with Internal Terminations for Bently Approved Third Party Pressure Transducers
143737-01 Cylinder Pressure I/O Module with External Terminations for Bently Approved Third Party Pressure Transducers
00580434 Internal I/O Module connector header, Euro Style, 8 pin. Used on I/O modules 143729-01.
00580441 Internal I/O Module connector header, Euro Style, 3 pin. Used on I/O modules 143729-01.
146973-01 Recip Multi-Event Wheel Kit
145732-01 Recip Multi-Event Wheel
146622-01 Recip Multi-Event Wheel Stud
165855-XX Recip Cylinder Pressure
283615 MTL 7796+ External Barrier
115M1270-XX Custom Band Type, dual track
114M1640-XX Custom Band Type, single track
111M8664-01 Installation manual for the band type
166M4363 Connector Header,Push-in-Spring Type(Alternative for PN 00580441)
166M2389Connector Header,Push-in-Spring Type(Alternative for PN 00580434)
