Endress Hauser Absolute and gauge pressure Cerabar PMP51

Endress Hauser Absolute and gauge pressure Cerabar PMP51

The Cerabar PMP51 digital pressure transmitter with metal membrane is typically used in process and hygiene applications for pressure, level, volume or mass measurement in liquids or gases. PMP51 is designed for high pressure applications up to 400bar.

Benefits of Endress Hauser PMP51

Accurate measurement of the process value even in the case of changing process temperature.

Process safety assured with small flush mounted process connections in hygienic applications,

For process pressure monitoring up to SIL2, certified to IEC 61508 and IEC 61511,

Modular concept for easy replacement of display or electronics

Easy menu-guided commissioning via on-site display, 4 to 20mA with HART, PROFIBUS PA, FOUNDATION Fieldbus

Seamless and independent system integration (HART/PA/FF)

Available with mounted manifolds: always fit, always tested for leaks

Specifications of Endress Hauser PMP51

Single chamber aluminum or stainless steel (316L) housing.

Process connections: Threads, flanges or hygienic connections

Process temperature: -40 to +130°C (-40 to +266°F), 150°C (302°F) for 1h

Measuring range: -1/0 up to +400bar (-15/0 up to +6,000psi)

Accuracy: ±0.1%, "Platinum" ±0.075%

International explosion protection certificates, SIL, hygienic approvals, marine approvals

Pressure transmitter with ceramic and metallic sensors

Application of Endress Hauser PMP51

The device is used for the following measuring tasks:

• Absolute pressure and gauge pressure measurement in gases, steams or liquids in all areas of process engineering and process measurement technology

• Level, volume or mass measurements in liquids

• High process temperature

– without diaphragm seals up to 130 °C (266°F), for a maximum of 60 minutes 150 °C (302°F)

– with diaphragm seals up to 400 °C (752°F)

• High pressure up to 400 bar (6000 psi)

• International usage thanks to a wide range of approvals

PMP51 application areas:

Absolute pressure measurement and pressure measurement in gases, steam or liquids in all process areas

engineering and process technology Level, volume or mass measurement in liquids

Processing temperatures up to 130 °C (266 °F), for a maximum of 60 minutes 150 °C (302 °F)