Sick DGS35-1K404096 encoder

Sick DGS35-1K404096 DGS series encoder

Pulses per revolution:2,500

Measuring step:90° electric/pulses per revolution

Measuring step deviation:± 45° / pulses per revolution

Error limits:± 45° / pulses per revolution

Communication interface:Incremental

Communication Interface detail:HTL / Push pull

Output frequency:300 kHz

Load current:40 mA

Operating current:100 mA (without load)

Connection type:Male connector, MS, 10-pin, radial

Supply voltage:8 ... 24 V

Reference signal, number:1

Reference signal, position:180°, electronically, gated with B negative

Mechanical design:Through hollow shaft

Shaft diameter:30 mm 1)

Flange type / stator coupling:T1 stator coupling

Weight:1.1 kg 2)

Shaft material:Brass

Flange material:Aluminum

Housing material:Aluminum

Start up torque:9 Ncm (+20 °C)

Operating torque:7 Ncm (+20 °C)

Operating speed:3,000 min?1

Moment of inertia of the rotor:490 gcm2

Bearing lifetime:4.5 x 10^9 revolutions

Angular acceleration:≤ 100,000 rad/s2

EMC:EN 61000-6-2, EN 61000-6-3

Enclosure rating:IP66, Housing side, male connector 1)

Permissible relative humidity:95 % (Condensation not permitted)

Operating temperature range:–20 °C ... +70 °C

Storage temperature range:–30 °C ... +85 °C, without package

Resistance to shocks:50 g, 11 ms

Resistance to vibration:20 g, 5 Hz ... 2,000 H