GE Fanuc Emerson IC693MDL740 Positive Logic output module

The IC693MDL740 is a module of the GE Fanuc Series 90 - 30 Programmable Logic Controller (PLC). It is a Positive Logic Output module, which means it sources current to the connected loads from the module common or positive power bus. This module consists of two groups, each containing eight channels. Each channel has a load rating of 0.5 Ampere.

On the top of the IC693MDL740 module, there are front - panel LED indicators. These LEDs separately indicate the actuated state of each channel within the module as well as the operational state of the module. As a sourcing output module, each of its channels can energize common electrical loads, such as contactors, relays, pilot lamps, buzzers, horns, and other D24 VDC - powered devices. This module does not have internal fusing. Therefore, to provide additional protection, external fuses can be installed.

The IC693MDL740 can be installed in any available slot of either a 5 - slot or 10 - slot Series 90 - 30 baseplate. The number of module instances may vary as long as the controller has enough memory to accommodate this 16 - point output module.

Technical specifications for IC693MDL740

BrandGE Fanuc

SeriesSeries 90-30

Part NumberIC693MDL740

Product DescriptionPositive Logic output module

Module Circuit typeSourcing

No of ChannelsSixteen (16)

Output Voltage Range12 to 24 volts DC (+20%, –15%)

Nominal Voltage output12/24 volts DC

No. of groupsTwo (2) groups

No. of channels per groupEight (8) channels

Output current per channel0.5 Amperes

Output Current per common2 Amperes for 10 ms

Inrush Current4.78 Amperes for 10 ms

Output Voltage Drop1 volt maximum

ON Response time2 ms maximum

Product typeDigital I/O

CompatibilityGE Fanuc 90-30 PLCs

Output points16

Module peak current draw110 milliamps

Module input voltge5 Volts DC

Relative humidity5 to 95%

Storage temperature-40 to 85 degrees Celsius

Operating Temperature0 to 60 degrees Celsius

Product Lifecycle Status*Discontinued/Obsolete