GE Fanuc Emerson IC693MDL940 Relay Output module

The IC693MDL940 is a GE - Fanuc 90 - 30 Series Programmable Logic Controller (PLC) module. It is a Relay Output module, which is designed with four groups, each containing four output channels, amounting to a total of sixteen output channels. Each channel of this relay output module takes the form of a Normally Open (NO) contact. Each output channel has a maximum pilot duty current capacity of 2 Amperes, while the maximum output capacity per common is 4 Amperes with a minimum load of 10 mA.

Each output channel has a maximum OFF - to - ON transition time of 15 ms and an ON - to - OFF transition time of 15 ms, with a maximum inrush current capacity of 5 Amperes. This module is designed with field - side and logic - side isolation of 1500 Volts and 500 Volts between groups. The module occupies a single slot of the 90 - 30 chassis. It has an internal power consumption of 7 mA (when all outputs are on) from the 5 - volt bus on the backplane and 135 mA (when all outputs are on) from the 24 - volt relay bus on the backplane. The IC693MDL940 has a rated operational voltage of 24 volts DC, 120/240 volts AC, and the operating voltage range is 5 to 30 VDC and 5 to 250 VAC, 50/60 Hz.

Technical specifications for IC693MDL940

BrandGE Fanuc

SeriesSeries 90-30

Part NumberIC693MDL940

Minimum Load10 mA

On Response Time15 ms maximum

Off Response Time15 ms maximum

Product DescriptionRelay Output Module

No of ChannelsSixteen (16)

Output Voltage Range5 to 30VDC and 5 to 250VAC, 50/60 Hz

Contact FormNormally Open (N.O.)

No. of groupsFour (4) groups

No. of channels per groupFour (4) channels

Output current per channel2 Amperes

Output Current per common4 Amperes

Inrush Current5 Amperes

Rated Voltage24 Volts DC, 120/240 Volts AC

Operating Voltage5 to 30 Volts DC 5 to 250 Volts AC, 50/60 Hz

Outputs per Module16

Maximum Load16 Amps maximum per module

Maximum Inrush5 Amps

Product Lifecycle Status*Discontinued/Obsolete