Siemens 6DL1134-6GH00-0PH1 SIMATIC ET 200SP HA series

6DL1134-6GH00-0PH1

Here are the parameters of 6DL1134 - 6GH00 - 0PH1:

• General Information

• Product Model: 6DL1134 - 6GH00 - 0PH1

• Product Type: SIMATIC ET 200SP HA Analog Input Module, AI 8xI 2 - / 4 - wire HART HA

• Firmware Version: Updatable

• Compatible Terminal Blocks: H1, M1

• Color Code: CC01

• I&M Data: Available (I&M0 - I&M3)

• Compatibility with Software: Configurable in STEP 7 TIA from V16, STEP 7 from V5.6, PCS 7 from V9.0, PCS neo from V3.0. PROFINET: GSDML V2.3

• Power Supply

• Rated current consumption without load: 75 mA

• Maximum current consumption without load: 100 mA

• Rated Voltage (DC)3: 24 V

• Allowable Voltage Range (DC)3: 19.2 V - 28.8 V

• Reverse - Polarity Protection: Yes

• Power Consumption:

• Analog Input

• Linearity error: [Value related to the input range, e.g., ±0.01%]

• Temperature error: [Value related to the input range, e.g., ±0.0009% / K]

• Number of Channels: 8

• Input Type: Current input, 2 - wire / 4 - wire HART

• Input Range: [Specific range, e.g., 0 - 20 mA, 4 - 20 mA]

• Resolution: [Typical value, e.g., 16 bits]

• Conversion Time: [Typical value, e.g., 60 ms per channel]

• Measurement Value Filtering: Parameterizable (None, Weak, Medium, Strong, selectable per channel)

• Error / Accuracy:

• Diagnostic Function3

• MAINT LED(yellow)

• Power supply voltage monitoring(PWR - LED, green)

• Channel status display(green LED)

• Channel diagnostic LED(red)

• Module diagnostic LED(green / red)

• Diagnostic Function: Yes

• Alarms: Diagnostic alarms and limit value alarms (two upper and two lower limits respectively)

• Diagnostic Information: Readable. Power supply voltage monitoring, open - circuit detection for each channel, and overflow / underflow detection

• Diagnostic Display LEDs:

• Potential Isolation3

• Potential Separation between Channels: No

• Potential Separation between Channels and Backplane Bus: Yes

• Potential Separation between Channels and Load Voltage L +: Yes

• Environmental Requirements3

• Horizontal installation: - 40 °C - 70 °C

• Vertical installation: - 40 °C - 60 °C

• Operating Temperature:

• Storage Temperature: - 40 °C - 85 °C

• Relative Humidity: 5% - 95% non - condensing

• Dimensions and Weight3

• Width: 22.5 mm

• Height: 115 mm

• Depth: 138 mm

• Weight: Approximately 150 g