Siemens 6DL1135-6TF00-0PH1 SIMATIC ET 200SP HA series

General Information

• Product Type: SIMATIC ET 200SP HA, Analog Output Module (AQ 8xI HART HA)

• Firmware Version: V1.0, updatable

• Terminal Blocks Compatibility: H1, M1, N0

• Color Code: CC01

• I&M Data: Available (I&M0 - I&M3)

• Compatibility with Software: Configurable in STEP 7 TIA from V16, STEP 7 from V5.6, PCS 7 from V9.0, PCS neo from V3.0. PROFINET: GSDML V2.3

Operating Mode

• AO: Supported

• Counter: Not supported

• Oversampling: Not supported

• MSI: Not supported

• Redundancy Function: Available for M1 terminals

Power Supply

• Rated Voltage (DC): 24 V

• Allowable Voltage Range (DC): 19.2 V - 28.8 V

• Reverse - Polarity Protection: Yes

• Power Consumption:

• Rated current consumption without sensor power supply: 60 mA

• Maximum current consumption without sensor power supply: 120 mA

Sensor Power Supply

• Output Voltage (Min): 18.2 V (L+ (- 1 V))

• Short - Circuit Protection: Electronic (response threshold 0.7 A - 1.3 A; up to 2.6 A with input - output redundancy)

• Max Output Current per Channel: 0.5 A

• Max Output Current per Module: 2 A

Analog Output

• Number of Analog Outputs: 8

• Output Types: Current (I)

• Output Ranges:

• 0 - 20 mA

• 4 - 20 mA

• Resolution: 16 - bit

• Update Time: Parameterizable (0.5 ms, 1 ms, 2 ms, 4 ms, 8 ms, 16 ms, 32 ms, 64 ms)

• Load Resistance:

• For 0 - 20 mA: 0 - 600 Ω

• For 4 - 20 mA: 0 - 600 Ω

• Linearity Error: ± 0.1 % of output range

• Temperature Drift: ± 0.005 % / K of output range

Diagnostic Function

• Diagnostic Function: Available

• Alarms: Diagnostic alarms and process alarms for each channel

• Diagnostic Information: Readable. Power supply voltage monitoring, sensor power supply monitoring, and short - circuit detection for each channel

• Diagnostic Display LEDs:

• MAINT LED (yellow)

• Power supply voltage monitoring (PWR - LED, green)

• Channel status display (green LED)

• Channel diagnostic LED (red)

• Module diagnostic LED (green/red)

Potential Isolation

• Potential Separation between Channels: None

• Potential Separation between Channels and Backplane Bus: Yes

• Potential Separation between Channels and Electronic Component Power Supply Voltage: None

Insulation

• Insulation Test: 1500 V DC / 1 min

Environmental Requirements

• Operating Temperature:

• Horizontal installation: - 40 °C - 70 °C

• Vertical installation: - 40 °C - 60 °C

Dimensions and Weight

• Width: 22.5 mm

• Height: 115 mm

• Depth: 138 mm

• Weight: Approximately 135 g