Siemens 6DL1134-6TH00-0PH1 SIMATIC ET 200SP HA series

6DL1134-6TH00-0PH1

Here is the parameter information introduction of 6DL1134-6TH00-0PH1:

• General Information

• Product Type: SIMATIC ET 200SP HA, analog HART input module, AI 16XI 2 - wire HART HA.

• Suitable for Terminal Blocks: H1, M1.

• Color Code: CC01.

• Channel Diagnostics: Available.

• Resolution: 16 - bit.

• Accuracy: ±0.1%.

• Firmware

• Version: V1.1.

• Updatable: Yes.

• Power Supply1

• Rated Voltage (DC): 24 V.

• Allowable Range (DC): 19.2 V to 28.8 V.

• Input Current1

• Rated Current: 80 mA (without sensor power supply).

• Maximum Current: 90 mA (without sensor power supply).

• Sensor Power Supply1

• 24 V Supply: Yes.

• Short - circuit Protection: Yes, electrical type (response threshold 0.7 A to 1.5 A).

• Maximum Output Current per Channel: 0.5 A.

• Maximum Output Current per Module: 2 A.

• Power Loss

• Typical Value: 4.5 W (without sensor power supply).

• Address Space

• Maximum per Module: 34 byte (32 - byte input, 2 - byte for query interface QI information) for non - HART mode.

• Maximum per Module with HART: 74 byte (32 - byte input, 2 - byte for QI information, 40 - byte for HART).

• Maximum per Module with MultiHART: 41 byte (32 - byte input, 2 - byte for QI information, 6 - byte input for HART and 1 - byte output for MultiHART command).

• Analog Inputs

• Number of Inputs

• Allowed Input Current (Damage Limit): Maximum 30 mA.

• Input Ranges: 0 - 20 mA and 4 - 20 mA, both with 16 - bit resolution including sign. The input resistance is 250 Ω for both ranges.

• Signal Processing

• Measurement Principle: Integrated (Sigma - Delta).

• Resolution: Up to 16 - bit including sign. 15 - bit at 0 - 10 mA and 60 Hz rejection frequency.

• Parameterizable Integration Time: Yes, for each channel.

• Parameterizable Filtering: Yes, selectable for each channel: none, weak, medium, strong.

• Linearity Error: ±0.01% related to input range.

• Temperature Error: ±0.005% / K related to input range.

• Crosstalk between Inputs: Minimum 60 dB.

• Repeatability at 25 °C: ±0.05% related to input range.

• Basic Error Limit at 25 °C: ±0.1% related to input range for current.

• Alarm/Diagnostic/Status Information

• Diagnostic Function: Yes.

• Diagnostic Alarm: Yes.

• Limit Value Alarm: Yes, two upper and two lower limit values respectively.

• Power Supply Voltage Monitoring: Yes.

• Diagnostic Display LEDs: MAINT LED (yellow), PWR - LED (green for power supply monitoring), channel status display LEDs (green), red LED for channel diagnostics, and DIAG - LED (green / red for module diagnostics).

• Potential Isolation

• Insulation Test: 1500 V DC / 1 min.

• Environmental Conditions1

• Operating Temperature: - 40 °C (minimum for both horizontal and vertical installation).

• Dimensions

• Width: 22.5 mm.

• Height: 115 mm.

• Depth: 138 mm.

• Weight1

• Approximately: 148g.

• Other Information

• Product Lifecycle: PM300: active product.

• Country of Origin: Germany.

• Compliance with RoHS Directive: Since 23.05.2017.

• EAN: 4047622433263.

• UPC: 804766483844.