Welcome to CW Green Tech Limited
[email protected]
86-136 6712 1125
IE-3300-8P2S
Here are the parameters of IE-3300-8P2S:
8 PoE - enabled Ethernet Ports: These ports support Power over Ethernet (PoE), which allows for the simultaneous transmission of data and power over a single Ethernet cable. Each port can provide a certain amount of power to powered - devices (PDs), such as IP cameras, wireless access points, and VoIP phones. The PoE standard supported is usually IEEE 802.3af/at or a similar specification.
2 SFP Fiber Ports: The 2 Small Form - factor Pluggable (SFP) fiber ports are used for high - speed, long - distance data transmission. They support various fiber optic modules, allowing for flexible connectivity options. The data transfer rate of these ports can reach up to 1 Gbps or higher, depending on the SFP module used.
Data Throughput: The switch is capable of handling a high volume of data traffic, with a total data throughput that meets the requirements of typical network applications. It can forward packets at a rate that ensures minimal latency and packet loss, even under heavy - load conditions.
MAC Address Table Size: It has a certain - sized MAC address table, which allows it to store and manage the MAC addresses of connected devices. This enables efficient forwarding of data packets within the local area network.
Total PoE Power Budget: The switch has a specific total power budget for PoE, which determines the maximum amount of power that can be supplied to all the PoE - enabled ports combined. This value is typically in the range of several tens of watts to over a hundred watts, depending on the model.
Per - Port PoE Power Output: Each PoE - enabled port can provide a certain amount of power to the connected PD. The per - port power output can vary, but common values are in the range of 15.4 W to 30 W, depending on the PoE standard supported.
Access Control Lists (ACLs): Allow administrators to define rules for filtering network traffic based on various criteria, such as source and destination IP addresses, ports, and protocols. This helps to enhance network security by preventing unauthorized access.
802.1X Authentication: Supports IEEE 802.1X port - based network access control, which requires devices to authenticate before being granted access to the network. This provides an additional layer of security.
VLAN Tagging and Trunking: The switch supports Virtual Local Area Network (VLAN) technology, enabling the segmentation of the network into multiple logical networks. VLAN tagging and trunking allow for the efficient routing of VLAN - tagged traffic between different network segments.
VLAN ID Range: It supports a certain range of VLAN IDs, which allows for the creation of multiple VLANs within the network. The typical VLAN ID range is from 1 to 4094.
