MEANWELL LRS-200-15 switching power supply LRS-200 series

Here is the parameter introduction of MEAN WELL LRS - 200 - 15:

• Electrical Parameters

• Input Voltage: 90 - 132VAC / 180 - 264VAC, selectable by switch. It can also work with 240 - 370VDC.

• Input Frequency: 47 - 63Hz.

• Output Voltage: 15VDC, adjustable within a certain range by potentiometer (usually around 13.5 - 16.5VDC).

• Output Current: 14A.

• Output Power: 210W4.

• Efficiency: Typically 88%4.

• No - load Power Consumption: Less than 0.75W4.

• Maximum Input Current: 4A / 115VAC, 2.2A / 230VAC.

• Inrush Current: Cold start, 60A / 115VAC, 60A / 230VAC.

• Leakage Current: Less than 2mA / 240VAC.

• Physical Characteristics1

• Dimensions: 215mm (length) x 115mm (width) x 30mm (height).

• Weight: 0.66kg.

• Output Connector Type: Screw terminal block.

• Housing Material: Metallic mesh case, which is beneficial for heat dissipation.

• Performance Parameters

• Operating Temperature Range: - 25°C to + 70°C4.

• Storage Temperature Range: - 40°C to + 85°C.

• Operating Altitude: Up to 5000 meters4.

• Vibration Resistance: Withstand 5G vibration test4.

• Minimum Isolation Voltage: 3000V.

• Protection Functions4

• Short-circuit Protection: Protects the power supply and connected devices from damage in case of a short circuit.

• Overload Protection: The protection range is 110% - 140% of the rated output power. It adopts hiccup mode and recovers automatically after the fault condition is removed.

• Over-voltage Protection: Protects the load from being damaged by excessive output voltage. The protection range is 115%-145% of the rated output voltage, and the protection type is to shut down the output voltage and recover by re - powering on.

• Over-temperature Protection: Activates when the internal temperature of the power supply is too high, preventing damage to components.

• Other Features4

• LED Indicator: There is an LED indicator for power-on, which allows users to easily check the working status of the power supply.

• Full-load Burn-in Test: 100% full-load burn-in test is carried out to ensure the reliability and stability of the product.

• Warranty: 3-year warranty.

• Certifications: Complies with international safety regulations such as IEC / UL 62368 - 1.