Beckhoff EL2008 EtherCAT terminal module the Ethernet Fieldbus

EL2008 EtherCAT Terminal, 8-channel digital output, 24 V DC, 0.5 A

The EL2008 digital output terminal connects the binary 24 V DC control signals from the automation device on to the actuators at the process level with electrical isolation. Each EtherCAT Terminal has eight channels that indicate their signal state via light emitting diodes.

Special features:

Connection of different load types possible (ohmic, inductive, lamp load)

Max. output current 0.5 A per channel

Short-circuit-proof outputs and reverse polarity protection

Technical data EL2008

Connection technology 1-wire

Number of outputs 8

Nominal voltage 24 V DC (-15%/+20%)

Load type ohmic, inductive, lamp load

Distributed clocks –

Max. output current 0.5 A (short-circuit proof) per channel

Short-circuit current typ. < 2 A

Reverse voltage protection yes

Breaking energy < 150 mJ/channel

Switching times typ. TON: 60 µs, typ. TOFF: 300 µs

Current consumption E-bus typ. 110 mA

Current consumption power contacts typ. 15 mA + load

Bit width in the process image 8 outputs

Configuration no address or configuration setting

Electrical isolation 500 V (E-bus/field potential)

Weight approx. 55 g

Operating temperature -25…+60°C

Storage temperature -40…+85°C

Relative humidity 95%, no condensation

Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos. IP20/see documentation

Pluggable wiring for all ESxxxx terminals