Eaton Cutler-Hammer D100EDN8 8 I/O Expander with 0 Inputs and 8 Outputs

Eaton Cutler-Hammer D100EDN8 8 I/O Expander with 0 Inputs and 8 Outputs

The D100EDN8 PLC, an expansion module controller, is part of the D100 series of modules within the Eaton Cutler - Hammer product line. It is powered by an Alternating Current (AC) ranging from 115 to 250 Volts and has power ratings between 20 and 40 Amperes. This I/O module features 8 output LEDs. Just like all the other controllers in the D100 series, the D100EDN8 has a 1K memory with a scan time of 8 milliseconds per memory unit. It also comes equipped with 16 timers and controllers.

Weighing approximately 0.56 kilograms, the D100EDN8 is colored black and silver and has dimensions of around 20 x 10 centimeters. The Cutler - Hammer D100 series of modules can be programmed using a hand - held programmer with an LED display. The memory of the D100EDN8 can also be modified directly from a personal computer, which must be connected via an expansion outlet cable. This module is further fitted with a Transistor Output for analog adaptability.

Technical specifications for D100EDN8

Manufacturer Eaton Cutler-Hammer

Brand Eaton Cutler-Hammer

Part Number/Catalog No. D100EDN8

Product Type 8 I/O Expander

Power Supply 115V AC

Inputs 0

Input Type N/A

Outputs 8

Output Type Transist.

Like all members of the D100 series, the D100EDN8 is a stand - alone system, possessing all the functions of a computing system, such as an input, an output, a RAM memory, a power supply, and LEDs for troubleshooting and error correction. The D100 series modules are categorized as either controllers or expanders, and the D100EDN8 module belongs to the expansion unit category.

During the installation of the D100EDN8 expansion module, it should be noted that this module is sensitive to the ambient humidity, temperature, and vibrations in the operating environment, as well as exposure to other harsh weather elements. Therefore, it should be mounted in a protective enclosure suitable for the industry in which it is used. Whenever the D100EDN8 expansion unit is used with a controller, the total number of inputs and outputs must be considered to avoid exceeding the maximum allowed. The length of the expansion cables should be short to enable high - speed counting. The units should also be positioned either vertically or horizontally, depending on physical constraints and for the simplicity of wiring. In addition to these installation requirements, strict compliance with the manufacturer's manual and specifications is essential at all times.