Eaton Cutler-Hammer D100CRA40A 40 I/O Controller with 24 Inputs and 16 Outputs

Eaton Cutler-Hammer D100CRA40A 40 I/O Controller with 24 Inputs and 16 Outputs 

The Eaton - Cutler-Hammer D100CRA40A is part of the D100 Programmable Logic Controller (PLC) product family. It has Twenty-Four (24) 115 VAC input channels and Sixteen (16) Triac outputs. This controller uses the D100 EE10 PROM. It is powered by an external supply voltage of 115VAC. This PLC is configured using the D100 programming software.

The D100CRA40A is a Programmable Logic Controller (PLC) belonging to the Eaton - Cutler Hammer Corporation. This electronic product is a microprocessor - based device within the D100 product series and is particularly suitable for the automation of micro and small - scale applications.

The D100CRA40A is an obsolete product, serving as a spare part for existing installations. It can be programmed using the D100 programming software, which comes with either a 5 ¼ - inch or 3 ½ - inch disk. To connect an IBM computer running the D100 programming software, the D100CRA40A must be equipped with a protocol module, an add - on module with an RS232 communication interface. It supports programming in the ladder language.

Technical specifications for D100CRA40A

Part Number/Catalog No. D100CRA40A

Product Type 40 I/O Controller

Power Supply 115V AC

Inputs Twenty-Four (24)

Input Type 115V AC

Outputs Sixteen (16)

Output Type Triac

System Max I/O Inputs 48

System Max. I/O Outputs 32

Capability High Speed Count and Analog

Manufacturer Eaton

Brand Cutler-Hammer

Product Family D100 Micro PLC

Compatible EEPROM D100EE10

Dimensions 100 mm (H) x 320 mm (W

Weight 3 lb or 6 oz or 1.5 kg

The D100CRA40A is provided with twenty - four (24) 115 VAC input channels and sixteen (16) Triac outputs. It supports expansion up to 120 I/O points and is installed with the D100 EE10 PROM.

The D100CRA40A requires a power supply voltage of 115 VAC. It can be installed with option modules such as an analog input module, expander module, protocol module, multidrop module, RS232 / 422 converter, Timer / Counter access module, and Programmable Read Only Memory (PROM) modules including EEPROM and UVPROM. LCD programmers, with part number D100PG10A, can also be used to program this controller locally.

Eaton Cutler-Hammer D100CRA40A introduction:

The D100CRA40A supports direct mounting to the enclosure using the four (4) provided mounting screws or on a DIN Rail. It has physical dimensions of 100 mm (height) x 320 mm (width). Its approximate weight is 3 lb (or 6 oz or 1.5 kg).

The Cutler - Hammer D100CRA40A programmable logic controller has a minimum load current of 20 mA at 12 Volts DC and can withstand a voltage of 1500 Volts AC for 1 minute. This controller features 24 inputs, 16 outputs, and a built - in PROM writer feature. The Cutler - Hammer D100CRA40A programmable logic controller can be combined with an expander unit. Once connected to the programmer, the controller can be programmed, edited, monitored, and operated. The capacity of the Cutler - Hammer D100CRA40A programmable logic controller can be expanded to a total of 120 I/O.