Welcome to CW Green Tech Limited
[email protected] 86-136 6712 1125
Home      Products Eaton Cutler-Hammer D100CD40 40 I/O Controller with 24 Inputs and 16 Outputs
Eaton Cutler-Hammer D100CD40 40 I/O Controller with 24 Inputs and 16 Outputs

Eaton Cutler-Hammer D100CD40 40 I/O Controller with 24 Inputs and 16 Outputs

  • Product Item : D100CD40
  • Product Brand : Eaton
  • INQUIRY

Eaton Cutler-Hammer D100CD40 40 I/O Controller with 24 Inputs and 16 Outputs

The D100CD40 is a micro-programmable logic controller and is part of the Cutler-Hammer D100 series. It is a 40 I/O controller with a manual counter. This controller has a 115 Volt AC power supply and 24 Volt DC input voltage requirement. Aside from its hand-held programmer feature, this controller also features an LCD display with a 1k RAM memory size. The programs of this D100CD40 controller can be organized by a personal computer. These D100 Programmable Logic Controllers, including the D100CD40, are created to meet various industry demands.


Technical specifications for D100CD40

Manufacturer Eaton Cutler-Hammer

Brand Eaton Cutler-Hammer

Part Number/Catalog No. D100CD40

Product Type 40 I/O Controller

Power Supply 115V AC

Inputs 24

Input Type 24V DC

Outputs 16

Output Type Transist.

System Max I/O Inputs 48

System Max. I/O Outputs 32

Eaton Cutler-Hammer D100CD40 40 I/O Controller introduction:

The D100 controllers constitute a stand - alone system. They possess all the necessary components to form a complete system, such as outputs, inputs, a power supply, a RAM memory, and diagnostic LEDs.

The D100CD40 features a transistor - type output that can only switch a DC current. Compared with relay and triac - type outputs, it is faster, has a longer lifespan, and can switch a small current. As one of the 40 I/O controllers, the D100CD40 has 16 outputs and 24 inputs, and its I/O capacity can be expanded up to 80 I/O.


They are available in various sizes and types and are usually resistant to most industrial electrical noises. The computer programming of these controllers can be carried out by using the D100CCS35 (3.5 - inch disk) or the D100CCS60 (5.25 - inch disk) software. Subsequently, the programs can be downloaded, uploaded, and stored on the disk.


The ambient humidity for this controller should be lower than 95% RH without condensation. For long - term storage, the humidity percentage should not exceed 60% RH. For the D100CD40 to function optimally, the environment should also be free from various pollutants and chemicals, including metallic powders, corrosive gases, and flammable gases.


Alternative Eaton Cutler-Hammer D100CD40 models names:

D100CD4O

D100CDA0

D10OCD40

D1O0CD40

D1OOCD4O

DL00CD40

DLOOCDAO