ABB 1TNA920622R2002 M10x kits Each kit M10x MD21 MD31 TA201

1TNA920622R2002

M102-M with MD21 (110VAC) Including: M102-M 110VAC (1TNA920622R0002)

MD21 (1TNA920500R0002)

TA201 (1TNA920005R2101)

1TNA920622R2002 is a motor control unit of M102-M with MD21 model under ABB brand. Its product parameters are as follows:

Electrical parameters

Rated working voltage: 24V, 110V, 240V are available

Rated insulation voltage: 690V

Rated current: 0.24-63A

Rated frequency: 50Hz

Protection function parameters

Phase failure protection: According to the ratio of the minimum line current and the maximum line current, the alarm value, trip value, trip time, etc. can be set

Three-phase unbalance protection: According to the ratio of the minimum line current and the maximum line current, the alarm value, trip value, trip time, etc. can be set

Stalling protection: According to the ratio of the maximum line current measurement value and the rated current of the motor, the trip value and trip time can be set

Undervoltage protection: Starts when the main circuit voltage is lower than the set value, and can set the alarm value, trip value, trip time, etc.

Light load protection: According to the ratio of the maximum line current and the rated current, the alarm value, trip value, trip time, etc. can be set

No-load protection: According to the ratio of the maximum line current and the rated current, the alarm value, trip value, trip time, etc. can be set

Ground fault (leakage) protection: Add a zero-sequence current transformer. When the leakage current value exceeds the set trip value, you can choose to delay tripping or instantaneous tripping

Motor thermal protection (PTC): Protection is achieved by detecting the resistance value of the PTC thermistor embedded in the motor winding. It can delay tripping or instantaneous tripping when the limit value is exceeded

Starting number limit protection: Limit the number of motor starts within a certain time interval, and prohibit new starts when the preset value is reached

Control function parameters

Control mode**: supports direct start, forward and reverse direct start, Y/△ start, dual speed control and other standardized motor control modes

Automatic restart**: There are two optional types, standard and enhanced, which can restart the motor in different ways according to different situations after a sudden voltage drop

Monitoring function parameters

Operation status monitoring: can monitor operation, shutdown, fault tripping and other status signals

Electrical parameter monitoring: including three-phase current, three-phase percentage current, current imbalance, three-phase line voltage, thermal capacity, power factor, power, electricity, leakage current, frequency, etc.

Maintenance information monitoring: records the number of contactor operations, tripping times, event records, motor running time, etc.

Other parameters

Product certification: CCC

Dimensions: There is no clear and detailed dimension value marking, only the number 5 is given, which may not be a complete and accurate dimension marking

Weight: 1KG

Communication method: supports Modbus communication protocol