Welcome to CW Green Tech Limited
[email protected]
86-136 6712 1125
The 1203-GU6 communications module from Allen-Bradley can communicate with different Allen-Bradley drives through a SCANport cable and sometimes through datalinks. The module is powered by a supply input voltage of 85 to 264 Volts AC with One (1) SCANport and One (1) DeviceNet communication port. The module converts or interprets DeviceNet messages to SCANport language or message that may be used by the product as information or operational data and parameter.
Brand Allen-Bradley / Rockwell Automation
Series 1203 Communication Module
Part Number 1203-GU6
Configuration DIP Switches
Connections Datalinks and SCANport cables
DeviceNet Connection 5-pin Phoenix connector
Enclosure NEMA Type 1, IP 30
Operating Temperature 32 to 122 degrees Fahrenheit
Node address 63 (factory default)
Relative Humidity 35 x 7.5 millimeters (1.38 x 0.30 inches)
UPC 662453521756
The 1203-GU6 is an Enhanced DeviceNet communication module manufactured by Allen-Bradley that is utilized to establish link between SCANport communication enabled devices and DeviceNet network or devices as well. The Enhanced DeviceNet module has Two (2) ports found on the front panel of the module that are intended for SCANport and DeviceNet connection. The SCANport terminal is designed with an 8-Pin female mini-DIN connector while the DeviceNet port is a 5-Pin or 10-Pin connector that is supplied with the module.
This module is installed to a DIN rail and powered by an external voltage of 24VDC. This module has a physical dimension of 1.8" W x 3.0" H x 5.0" D or 4.57 cm x 7.62 cm x 12.7 cm. Provide clearance when installing this module to allow natural air flow and wiring activities. Supported devices of this module must have a SCANport communication port. These devices include 1305 AC MICRO Drive, 1336 IMPACT Drive, 1336 PLUS AC Drive, 1336 PLUS II Drive, 1336 FORCE Drive, 1394 AC Multi-Axis Motion Control System, SMC Dialog Plus, SMP-3 Smart Motor Protector, 1397 Digital DC Drive, and 1557 Medium Voltage Drive.
1203-CN1 from the 1203 Communication Modules series.
The Allen-Bradley 1203-CN1 ControlNet communications module is made to act as an interface between the ControlNet network and a single SCANport product. It can also connect to a PC and it offers the b
The Allen-Bradley/Rockwell Automation 1203-FM1 module is a specialized Flex I/O SCANport module. It can be removed and inserted under power, but it can only be installed on a special 1203 terminal bas
1203-GD1 from the 1203 Communication Modules series.
The Allen-Bradley 1203-GD1 Remote I/O communications module enables the users to connect SCANport products to Remote I/O links or devices. Compatible with a number of SCANport products, the 1203-GD1 m
1203-GD2
The Allen-Bradley 1203-GD2 Serial Communications Module has an input voltage of 85-264 volts AC (1-Phase), and an input frequency of 45-63 Hertz. The 1203-GD2 also has a maximum input current of 35 mi
1203-GK1 from the 1203 Communication Modules series.
The 1203-GK1 Remote I/O communications module is made by Allen-Bradley to communicate with Allen-Bradley drives through SCANport and Remote I/O communication cables. It can also use a serial link.
1203-GK2
The Allen-Bradley 1203-GK2 serial communications module is a Series B SCANport communications module that can operate on 24 Volts DC voltage or 120 to 240 Volts AC voltage. It can be an open or enclos
1203-GK5 from the 1203 Communication Modules series.
The Allen-Bradley 1203-GK5 Module has an input voltage of 12-25 volts DC and an input current of 110 milliamps. The SCANport load on the 1203-GK5 is 60 milliamps. Baud rates for the 1203-GK5 are 125,
1203-GU6 from the 1203 Communication Modules series.
The 1203-GU6 communications module from Allen-Bradley can communicate with different Allen-Bradley drives through a SCANport cable and sometimes through datalinks. It fits into an IP 30 rated enclosur
1203-SFC from the 1203 Communication Modules series.
The Allen-Bradley 1203-SFC serial cable has a length of 2 meters. With a locking low profile connector, the 1203-SFC serial cable can connect to the 22-SCM-232 serial converter by
1203-SG2 from the 1203 Communication Modules series.
The Allen-Bradley 1203-SG2 SCANport expander has a length of 3 meters and an IP 30 enclosure type (NEMA Type 1). The 1203-SG2 expander is capable of being mounted on a DIN rail and it includes one 120
1203-USB
The 1203-USB converter by Allen-Bradley has an electrical consumption rating of 130 milliamps at 12 Volts DC for the DPI drive and a consumption of 170 milliamps at 5 Volts DC for the DSI drive.
