Welcome to CW Green Tech Limited
[email protected]
86-136 6712 1125
The Allen-Bradley 1203-GD1 Remote I/O communications module enables the users to connect SCANport products to Remote I/O links or devices. The module is powered by a supply input voltage of 85 to 264 Volts AC with One (1) SCANport and One (1) Remote I/O terminal. The 1203-GD1 is an Allen-Bradley Communication module that is used to link devices with SCAN port communication port to a Remote I/O network. These Two (2) ports co-exists in the same module while the module itself mounts to a DIN rail, without the need to be mounted within a PLC rack thus allowing independent or stand-alone configuration. Being installed separately, this module requires an external power supply. The power supply requirement of the communication module is 84 to 264VAC.
Brand Allen-Bradley/Rockwell Automation
Series 1203 Communication Modules
Part Number 1203-GD1
Input Voltage 85 to 264 Volts AC, 1-Phase
Input Current 35 milliamps maximum
Input Frequency 45 to 63 Hertz
SCANport Load 60 milliamps DC
Operating Temp. 0 to 50 degrees Celsius
Storage Temp. -40 to 85 degrees Celsius
Relative Humidity 0 to 95% (non-condensing)
Product SCANport
Controller Allen-Bradley Remote I/O
Baud Rates 57.6 KBaud, 115.2 KBaud, 230.4 KBaud
Rack Sizes 1/4, 1/2, 3/4, Full
Height 76 millimeters (3 inches)
Width 45 millimeters (1.8 inches)
Depth 123 millimeters (4.8 inches)
Enclosure NEMA Type 1 (IP 30)
DIN Rail Standard 35 x 7.5 millimeters (1.38 x 0.30 inches)
Allen-Bradley 1203-GD1 has front panel terminals that consists of One (1) SCANport, One (1) Remote I/O and power supply terminal. It also has LED indicators to detect Fault, SCANport STS, Health, Rem I/O ACT and Remote STS. Except for the Fault indicator that indicates RED when module fault is detected, other LED indicators provide GREEN light. If earlier version of SCANport module is used, amber is used instead of Green.
Compatible Remote I/O products for the Remote I/O communication port includes Logix5550, PLC-2/30 with SD2, PLC-3, PLC Classic Family, including the PLC-5/10 with 1771-SN in Discrete Mode, PLC-5/15, PLC-5/25, PLC Enhanced family, including the PLC-5/20, PLC-5/30, PLC-5/40, PLC-5/40L, PLC-5/60, PLC-5/60L, PLC-5/80, PLC-5/250, SLC 500 with a 1747-SN Remote I/O Scanner Module and scanner modules including subscanner devices.
Allen-Bradley 1203-GD1 has DIP switches installed at the bottom of the module to define the operation terminating resistor that is used to close the Remote I/O segment. The 1203-GD1 module is powered by an input voltage range of 85 to 264 Volts AC, along an input maximum input current of 35 mA and frequency between 45 and 63 Hertz. The SCANport load is 60 mA DC.
1203-CN1 from the 1203 Communication Modules series.
The Allen-Bradley 1203-CN1 ControlNet communications module is made to act as an interface between the ControlNet network and a single SCANport product. It can also connect to a PC and it offers the b
The Allen-Bradley/Rockwell Automation 1203-FM1 module is a specialized Flex I/O SCANport module. It can be removed and inserted under power, but it can only be installed on a special 1203 terminal bas
1203-GD1 from the 1203 Communication Modules series.
The Allen-Bradley 1203-GD1 Remote I/O communications module enables the users to connect SCANport products to Remote I/O links or devices. Compatible with a number of SCANport products, the 1203-GD1 m
1203-GD2
The Allen-Bradley 1203-GD2 Serial Communications Module has an input voltage of 85-264 volts AC (1-Phase), and an input frequency of 45-63 Hertz. The 1203-GD2 also has a maximum input current of 35 mi
1203-GK1 from the 1203 Communication Modules series.
The 1203-GK1 Remote I/O communications module is made by Allen-Bradley to communicate with Allen-Bradley drives through SCANport and Remote I/O communication cables. It can also use a serial link.
1203-GK2
The Allen-Bradley 1203-GK2 serial communications module is a Series B SCANport communications module that can operate on 24 Volts DC voltage or 120 to 240 Volts AC voltage. It can be an open or enclos
1203-GK5 from the 1203 Communication Modules series.
The Allen-Bradley 1203-GK5 Module has an input voltage of 12-25 volts DC and an input current of 110 milliamps. The SCANport load on the 1203-GK5 is 60 milliamps. Baud rates for the 1203-GK5 are 125,
1203-GU6 from the 1203 Communication Modules series.
The 1203-GU6 communications module from Allen-Bradley can communicate with different Allen-Bradley drives through a SCANport cable and sometimes through datalinks. It fits into an IP 30 rated enclosur
1203-SFC from the 1203 Communication Modules series.
The Allen-Bradley 1203-SFC serial cable has a length of 2 meters. With a locking low profile connector, the 1203-SFC serial cable can connect to the 22-SCM-232 serial converter by
1203-SG2 from the 1203 Communication Modules series.
The Allen-Bradley 1203-SG2 SCANport expander has a length of 3 meters and an IP 30 enclosure type (NEMA Type 1). The 1203-SG2 expander is capable of being mounted on a DIN rail and it includes one 120
1203-USB
The 1203-USB converter by Allen-Bradley has an electrical consumption rating of 130 milliamps at 12 Volts DC for the DPI drive and a consumption of 170 milliamps at 5 Volts DC for the DSI drive.
