Allen Bradley 1203-GK5 SCANport communications module

The 1203-GK5 module mounts on a DIN rail system and connects to SCANport products with the use of a SCANport cable. Some features on the module include DIP switches to enable the user to configure the module before connecting it to the DeviceNet network. The module also has a Faulted Node Recovery system, enabling one to change the node address of a device. The user fault response configuration allows the user to customize the adapter actions to communication errors, and LEDs aid in diagnosing network and SCANport health. Required tools and equipment to set up the 1203-GK5 are as follows: DeviceNet communications module (1203-GK5), either a 5-pin or 10-pin plug-in connector, 35 x 7.5 mm DIN rail, 1/8” flathead screwdriver, and appropriate cables for SCANport and DeviceNet connections.

1203-GK5, The Allen-Bradley 1203-GK5 Module has an input voltage of 12-25 volts DC and an input current of 110 milliamps. The SCANport load on the 1203-GK5 is 60 milliamps. 

Technical specifications for 1203-GK5

BrandAllen Bradley / Rockwell Automation

SeriesPanelview 300

Part Number1203-GK5

Input Voltage12 to 25 Volts DC

Input Current110 Milliamps

SCANport Load60 Milliamps

Operating Temp.0 to 50 Degrees (C)

Storage Temp.-40 to 85 Degrees (C)

Relative Humidity0 to 95% (non-condensing)

Baud Rates125. 250, 500 k BPS

Height76 mm (3.0 in.)

Width45 mm (1.8 in.)

Depth123 mm (4.8 in.)

EnclosureNEMA Type 1

DIN Rail Standard35 mm x 7.5 mm (1.38 in. x 0.30 in.)