3-way signal conditioner, for electrical isolation of analog signals, with screw connection, input signal: 0(4) mA ... 20 mA, output signal: 0(4) mA ... 20 mA
The 6.2 mm wide standard signal 3-way isolating amplifier MINI MCR-SL-I-I(-SP) is used for electrical isolation, amplification and filtering of standard signals.
On the input and output side, the analog standard signals 0...20 mA or 4...20 mA are available, electrically isolated.
Power (19.2 V DC to 30 V DC) can be supplied through connection terminal blocks on the modules or in conjunction with the DIN rail connector.
Product typeSignal conditioner
Product familyMINI Analog
No. of channels 1
Data management status
Article revision 13
Insulation characteristics
Overvoltage categoryII
Pollution degree 2
model:MINI MCR-SL-I-I-SP - 2864723
Rated insulation voltage 50 V AC/DC
Electrical isolationBasic insulation in accordance with EN 61010
Electrical isolation between input and outputyes
Limit frequency (3 dB)approx. 100 Hz
Maximum power dissipation for nominal condition 250 mW
Test voltage (Input/output/supply) 1.5 kV AC (50 Hz, 60 s)
Protective circuitTransient protection
Signal transmission behaviorIn = Out
Step response (10-90%) 3.2 ms
Maximum temperature coefficient; 0.01 %/K
Temperature coefficient, typical; 0.002 %/K
Maximum transmission error≤ 0.1 % (of final value)
Nominal supply voltage24 V DC
Supply voltage range19.2 V DC ... 30 V DC (The DIN rail connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, item no. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail in accordance with EN 60715)
Max. current consumption; 20 mA
Power consumption; 450 mW
Width 6.2 mm
Height 93.1 mm
Depth 101.2 mm
Item number 2864406
Packing unit 1 pc
Minimum order quantity 1 pc
Product key CK1211
Catalog pagePage 97 (C-7-2015)
GTIN 4017918956158
Weight per piece (including packing) 86.9 g
Weight per piece (excluding packing) 71.1 g
Customs tariff number 85437090
Country of origin DE
MINI MCR-SL-U-U - Signal conditioner
MINI MCR-SL-I-I-SP - Signal conditioner
MINI MCR-SL-IDS-I-I-SP - Output signal conditioner
MINI MCR-SL-RPS-I-I-SP - Repeater power supply
MINI MCR-SL-RPSS-I-I-SP - Repeater power supply
MINI MCR-SL-2CP-I-I-SP - Passive separator
MINI MCR-SL-1CP-I-I-SP - Passive separator
MINI MCR-SL-U-I-4-SP - Signal conditioner
MINI MCR-SL-U-I-0-SP - Signal conditioner
MINI MCR-SL-U-U-SP - Signal conditioner
MINI MCR-SL-UI-I-LP-SP-NC - Signal conditioner
MINI MCR-SL-I-U-4-SP - Signal conditioner
MINI MCR-SL-I-U-0-SP - Signal conditioner
MINI MCR-SL-UI-2I-SP-NC - Signal duplicator
MINI MCR-SL-U-UI-SP - Signal conditioner
MINI MCR-SL-U-UI-SP-NC - Signal conditioner
MINI MCR-SL-UI-UI-SP - Signal conditioner
MINI MCR-SL-UI-2I-SP - Signal duplicator
MINI MCR-SL-SHUNT-UI-SP - Signal conditioner
MINI MCR-SL-SHUNT-UI-SP-NC - Signal conditioner