Sick safety switches i10-HA113

Sick safety switches i10-HA113

Electro-mechanical safety switch for door monitoring on the hinge

Safety hinge switches are used for monitoring rotatable protective devices, e.g., swiveling gate and hinged doors. The hollow or solid shaft of the safety hinge switch forms a fixed and positive connection between the safety switch and the door hinge. These safety switches offer a high level of protection against tampering. The i10H safety hinge switch is enclosed in a compact plastic housing and comes with a solid stainless steel shaft.

Benefits

Highl level of prevention against tampering, which ensures optimum machine safety

Easy to mount directly on the door or gate hinge – no restriction to the open area of the guard

Features of Sick safety switches i10-HA113

Standardized plastic housing

Stainless steel solid shaft with  10 mm

1 cable entry M16 x 1.5

Slow action switching element with up to 3 contacts

Adjustable switching point

IP67 enclosure rating

Technical date Sick safety switches i10-HA113

Number of positive action N/C contacts:2

Number of N/O contacts:1

Actuation frequency:≤ 3,600 /h

Actuation torque:≥ 0.08 Nm

Directions of rotation:2

Switching angle:Adjustable 5° ... 14°

B10d parameter:2 x 106 switching cycles (with small load)

Type:Type 1 (EN ISO 14119)

Actuator coding level:Uncoded (EN ISO 14119)

Safe state in the event of a fault:The switch has no internal fault detection and is unable to assume a safe state in the event of a fault. Fault detection is performed by the connected safety-related logic unit.

Switching principle:Slow action switching element

Usage category:AC-15/DC-13 (IEC 60947-5-1)

Rated operating current (voltage):

3 A (240 V AC)

2 A (24 V DC)

Rated insulation voltage Ui:250 V

Rated impulse withstand voltage Uimp:2,500 V AC

Short-circuit protection:3 A gG

Switching voltage:≥ 5 V DC

Switching current (switching voltage):5 mA (5 V DC)

Relate products Sick safety switches i10-HA113