Welcome to CW Green Tech Limited
[email protected] 86-136 6712 1125
Home      Products Allen Bradley 1756-OA8D ControlLogix Output Module
Allen Bradley 1756-OA8D ControlLogix Output Module

Allen Bradley 1756-OA8D ControlLogix Output Module

  • Product Item : 1756-OA8D
  • Product Brand : Allen-Bradley
  • INQUIRY

The 1756-OA8D ControlLogix Output Module by Allen-Bradley is an 8-point output ControlLogix Diagnostic module mounted on any slot of the 1756 ControlLogix Chassis. Like most modules in the series, it has back-plane ratings of 175mA at 5.1V DC and 250mA at 24V DC, with a gross backplane rating of 6.9W. Its output voltage ranges between 74 and 132V AC at 47-63Hz and it has a maximum ON/OFF and OFF/ON delay time of 9.3ms at 50Hz and one of 11ms at 50Hz. The 1756-OA8D has a draw current of 175mA at 5.1V and 250mA at 24V and a power dissipation of 53W and a thermal dissipation of 18.0 BTU/hr. In its OFF state, it has a leakage current of 3mA per point and a maximum drop voltage of 3.0V at 1.0A. The current rating on each output point is 1A at 30 0C which linearly de-rates at a temperature higher than this and the net current on the overall module is 8A also at 30 0C and it will also linearly de-rate at any higher temperature value. The 1756-OA8D module has a maximum surge current of 8A for 43ms per point, recurring every 2s at 30 °C, and the minimum load on each output point is 10mA. It has an isolation voltage of 125V (Continuous) with basic (insulation Type) tested at 1200V AC for 2s between output group-to-group and outputs-to-backplane but there is no isolation between individual group outputs. The 1756-OA8D has a single slot width and the keying on the Removable Terminal Block (RTB) is at the user’s discretion. It is designated the T4A code, and has an optimal temperature range of 0-60 °C (32-140 °F), at 5-95% non-condensing relative humidity, and is enclosed in an open-style rated enclosure. It weighs approximately 1Kg (2.25lb).

Technical specifications for 1756-OA8D

ManufacturerRockwell Automation

BrandAllen-Bradley

Part Number/Catalog No.1756-OA8D

SeriesControlLogix

Module TypeDiagnostic AC Output Module

Outputs8 Diagnostic

Voltage120 Volts AC

Operating Voltage Range74-132 Volts AC

Maximum Output Current Rating-Point1 Amp at 30 degrees Celsius, 0.5 Amps at 60 degrees Celsius

Maximum Output Current Rating-Module8 Amps at 30 degrees Celsius and 4 Amps at 60 degrees Celsius

Power Dissipation (Max)5.3 Watts at 60 degrees Celsius

Backplane Current at 5 Volts175 milliamps

Backplane Current at 24 Volts250 milliamps

Removeable Terminal Block(s)1756-TBNH, 1756-TBSH

Isolation Voltage50 Volts Continuous

EnclosureNone