Welcome to CW Green Tech Limited
[email protected] 86-136 6712 1125
Home      Products Bently Nevada 330103-00-03-50-02-CN Compressor Shaft Vibration Probe
Bently Nevada 330103-00-03-50-02-CN Compressor Shaft Vibration Probe

Bently Nevada 330103-00-03-50-02-CN Compressor Shaft Vibration Probe

  • Product Item : 330103-00-03-50-02-CN
  • Product Brand : Bently Nevada
  • INQUIRY

Bently Nevada 330103-00-03-50-02-CN Compressor Shaft Vibration Probe

The bently 3300XL is used for shaft vibration, shaft displacement and speed measurements on bearing machinery.

Key phase and rotational speed measurements in accordance with AP670 standard.

The 3300XL preamplifier is highly resistant to radio interference, even when installed

even when mounted in a fibreglass enclosure, and is immune to nearby radio signal

interference from nearby radio signals, even when mounted in a fibreglass enclosure.

bently3300XL eddy current sensor system receives non-contact

bently3300XL Series 5mm, 8mm, 11mm,

25mm and Nsv eddy current probes and extension cables. Frequency

shall be 0-10kHz using a three core field link shielded cable from the

3300XL preamplifier to the monitor to a maximum length of 305 metres. Electrical

Source -17.5Vdc to -26Vdc with a maximum current of 12mA.

Bentley bently 3300XL 8mm Eddy Current Sensor Vibration Probe

The head has a linear range of 2mm and a sensitivity of 7.87V/mm

(200mV/mil) earth 5%, preamplifier weight 246g, preamplifier

330180-50-00 Temperature range Operating temperature -35°C to +85°C

3300XL preamplifier 330180-AXX-BXX, overall length 1m,5m respectively

1m, 5m and 9m systems, 5m probes can only be used with 5m preamplifiers.

The 5 metre probe can only be used with the 5 metre preamplifier. Mounting options are rail and panel mounting, approval

organisational options are no requirements and hazardous area approvals.

Bentley bently 3300XL eddy current sensor vibration probe calibration

Equipped with Bentley eddy current probe flow calibrator TK-3E.

Commonly used Bentley bently3300XL eddy current sensor vibration probe

Models are as follows.

330103-00-05-10-02-00/05/cn

330103-00-06-10-02-00/05/cn

330104-00-08-10-02-00/05/cn

330104-00-09-10-02-00/05/cn

330105-02-12-10-02-00-00/05/cn

330106-05-30-10-02-00-00/05/cn

330709-000-060-10-02-cn

330851-02-00-60-10-00-cn

330910-00-20-10-02-00

Commonly used bently 3300XL vibration probe preamplifier models are as follows

330180-50-00

330180-51-00

330180-90-CN

330180-91-00

330780-91-00

330850-50-05

Commonly used bently 3300XL vibration probe extension cable models are as follows.

330130-040-00-00

30130-040-00-CN

330130-040-01-00

330130-080-00-CN

330730-040-00-00

330854-040-24-cn

330930-040-00-00

The bently 3300XL Vibration Probe System is commonly used with the following vibration monitors

modules or vibration transmitters.

990 series

Vibration Displacement Velocity Acceleration Module 3500/42M-01-00

Expansion Differential Thermal Expansion Monitoring Module 3500/45M-01-00

Rotational Speed Measurement Module 3500/50M-01-00-01

Four-channel vibration monitor 1900/65A

Single Channel Transmitter 990-05-50-01-00

990-05-50-01-cn

The bently 3300XL Vibration Probe System is often used with the following vibration monitors