Honeywell SS4-AS2-CSS-E-H flame detector

Honeywell SS4-AS2-CSS-E-H flame detector

ire Sentry SS4-A

The Fire Sentry SS4-A represents the world's pre-eminent UV/IR technology for ElectroOptical Flame Detectors with tens of thousands successfully operating in a multitude of installations worldwide. This multi-spectrum detector senses radiant energy in the ultraviolet (UV), visible and wide band Infrared™ (IR) spectrum. The radiant energy from all types of flaming fires will alert the detector to their presence.

To eliminate common nuisance false alarms that occasionally occur with UV-only, IR-only, Dual IR or Dual Mode UV/IR detectors, the Fire Sentry SS4 detectors' FireLogic signal processing requires that UV, visible and wide band IR radiant energy all be evaluated before declaring a fire. The smart detector utilises real-time signal processing algorithms that are optimised to alarm on all types of fires, while virtually eliminating the possibility of false alarms.

Fire Sentry SS4-AS

The Fire Sentry SS4-AS processes UV, IR and Visible (VIS) spectral ranges from ruggedised solar-blind UV, "Quantum-Effect" IR and VIS sensors correspondingly. It is optimised for detection of hydrogen, ethanol, methanol and methane (natural gas) fires and like the other detectors in its family, it responds to Type A, B and C flaming fires.

Fire Sentry SS4-AUV

The Fire Sentry SS4-AUV represents the leading edge technology UV optical flame detectors. This flame detector senses radiant energy in the ultraviolet (UV) spectrum. The radiant emissions of flaming fires will alert the detector to their presence. The SS4-AUV is for indoor applications where UV sources such as welding are not present.

Operation Honeywell SS4-AS2-CSS-E-H flame detector

The Fire Sentry SS4 detectors operate from standard 24 Volt DC power and interface to approved fire alarm panels or standard PLC's. On power up, a self-test is performed and the fault relay resets to show no faults. The front LED lights flash every ten seconds to indicate power is on.

The continuous spectral data stream of information from the sensor array is analysed by the microprocessor. Upon alarm, the detector activates the alarm relay and stores all the pre-fire spectral data in non-volatile memory for retrieval and evaluation. This Fire Pic™ data can be used to postulate the cause of the fire. As part of the FS2000™ System, the SS4 family of detectors communicate with CM1-A Controller via a four wire bi-directional RS-485 FireBus™.

The field of view for the Fire Sentry SS4 detectors is the widest in the industry with a 120° cone of vision. This means more hazard area can be covered by each detector. Greater sensitivity also increases the volume covered by each detector; up to four times more than some other detectors.

Using sophisticated microprocessor signal processing algorithms, false alarm rejection is maximised - with virtual immunity to false alarms from arc welding, corona discharge and other common non-fire sources.

Honeywell SS4-AUV2-CSS-E-H flame detector Features:

Multi-Spectrum™: senses ultraviolet, visible and wide band Infrared™

Built-in test for optical "through the lens" testing

False alarm immunity

Detects hydrocarbon and non-hydrocarbon based fires

Wide field-of-view and solar-blind

Adjustable detector sensitivity

Microprocessor based algorithms: FirePic™, Snapshot™ and Tri-Mode Plot™

Wide temperature range of operation

Compatible with standard approved fire alarm panels

Explosion-proof housing

Time programmable alarm verification

mA output option

Meets SIL 2 requirements

Fire Sentry SS4-AUV Features:

Senses solar-blind ultraviolet band

Built-in test for optical "through the lens" testing

Utilises long-life, ruggedised UV sensors

Detects hydrocarbon and non-hydrocarbon based fires

Wide field-of-view and solar-blind

Adjustable detector sensitivity

Microcomputer based algorithms: FirePic&trad;, Snapshot™ and UV Plot

Wide temperature range of operation

Compatible with standard approved fire alarm panels

Explosion-proof housing

Time programmable alarm verification

mA output option

Honeywell SS4-AS2-CSS-E-H flame detector Applications include:

• Petrochemical facilities and Refineries

• Co-Generation plants

• Aircraft hangars

• Silane and Hydrogen gas storage

• Gas Turbines and power plants

• Gas compressor stations

• Warehouses

• Semiconductor