Honeywell MCP1A-R470SF-K013-01 Indoor Manual Call Point

Honeywell MCP1A-R470SF-K013-01 Indoor Manual Call Point

The MCP1A product version is supplied with both a resistor and normally open clean contact electrical options.These options are easily utilised by simply connecting the terminal block to the required connection in the back of the MCP1 product. A variety of resistor versions are available, with both 470W and 680W offered as standard. However, other resistor types can be provided upon request.The MCP1B product version allows for connection to ‘Savwire’ systems.

Features of Honeywell MCP1A-R470SF-K013-01

Unique ‘Plug & Play’ installation concept

Total ‘Flex-Ability’ in the choice of operating element

Anti-Tamper facility

Enhanced aesthetics

Fully approved to the latest standards

Backward compatibility

CPD Approved.

Specifications of Honeywell MCP1A-R470SF-K013-01

Make: Honeywell

Model: MCP1A-R470SF-K013-01

Electrical Connection; 470WResistor & N\O 30VDC

Cable Termination: 0.5-2.5mm2

Maximum Voltage: 30VDC

Current Rating (switch only): 2 Amps

Humidity:93± 3% non-condensing

Operating Temperature:-100C to +550C

Storage Temperature:-100C to +550C

Ingress Protection (IP) Rating: IP24

Installation efficiency, flexibility and full compliance with the latest standards are at the heart of the new MCP indoor call point range.

Installation time and ultimately cost, are of paramount importance to any fire or security installer.  The MCP range directly reflects this need by providing a unique ‘plug and play’ concept designed specifically to reduce installation time.  All new MCP products utilize a special terminal block, where all initial installation cabling is terminated. This terminal block is then simply connected to the back of the MCP. Simple, but effective, with no re-termination required and no time wasted.

Through new standards and legislation, both break glass and resettable operating elements can now be used within a manual call point.  To provide you with the greatest ‘flex-ability’, the new MCP range can be configured as either a break glass or resettable unit by simply changing from one element to another. No other additional parts or alternative products need to be ordered.

All MCP indoor call point products also help preserve the integrity of the overall system as illegal removal of the product lid will result in the call point operating and the system going into alarm. Full compliance with the latest standards is essential and the new MCP indoor call point range is fully approved to the latest EN54-11 standard (Compliant markings only).