Beckhoff EJ3202 EtherCAT plug-in module

Beckhoff EJ3202 EtherCAT plug-in module

The EJ3202 EtherCAT plug-in module allows resistance sensors to be connected directly. The module's circuitry can operate 2- and 3-wire sensors. A microprocessor handles linearization across the whole temperature range, which is freely selectable. The EJ3202’s standard settings are: resolution 0.1°C in the temperature range of Pt100 sensors in 3-wire connection. The signal state is indicated by light emitting diodes. Sensor malfunctions such as broken wires are indicated by error LEDs.

Technical data:EJ3202

Connection method:2- or 3-wire (default: 2-wire)

Number of inputs:2

Measuring range:-200…+850°C (Pt sensors); -60…+250°C (Ni sensors)

Power supply:via the E-bus

Technology:temperature measurement (RTD)

Distributed clocks:–

Input filter limit frequency:typ. 1 kHz

Sensor types:Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000, resistance measurement (e.g. potentiometer, 10 Ω…1/4 kΩ), KTY sensors (types see documentation)

Conversion time:approx. 85 ms default setting, 2…800 ms configurable

Resolution:0.1°C per digit

Measurement error/uncertainty:< ±0.5°C for Pt sensors

Electrical isolation:500 V (E-bus/field potential)

Current consumption E-bus:typ. 165 mA

Special features:integrated digital filter, limit value monitoring, variable connection technology

Weight:approx. 30 g

Operating/storage temperature:-25…+60°C/-40…+85°C

Relative humidity:95%, no condensation

EMC immunity/emission:conforms to EN 61000-6-2/EN 61000-6-4

Vibration/shock resistance:conforms to EN 60068-2-6/EN 60068-2-27

Protect. rating/installation pos.:IP20/see documentation

Approvals/markings:CE, UL

Housing data Beckhoff EJ3202 EtherCAT plug-in module

Design form:EtherCAT I/O plug-in module

Material:polycarbonate

Installation:on signal distribution board

Mechanical coding:EJ plug-in module: signal-specific coding pins on the housing,

signal distribution board: holes in the printed circuit board

Locking:latching lug in circuit board cut-out

Connection method:field wiring: application-specific wiring level on the signal distribution board,

EJ plug-in module: 2 x 20-pin socket strip

Dimensions (W x H x D):12 mm x 66 mm x 55 mm