Beckhoff EJ3068 EtherCAT plug-in module

Beckhoff EJ3068 EtherCAT plug-in module

The EJ3068 EtherCAT plug-in module processes signals in the range between 0 and 10 V. The voltage is digitized with a resolution of 12 bits and is transmitted (electrically isolated) to the higher-level automation device. The module combines eight channels in one housing. The signal state is indicated by light emitting diodes.

Technical data:EJ3068

Number of inputs:8 (single-ended)

Power supply:via the E-bus

Technology:single-ended

Signal voltage:0…10 V

Distributed clocks:–

Internal resistance:> 130 kΩ

Input filter limit frequency:1 kHz

Conversion time:typ. 1.25 ms default setting, configurable

Resolution:12 bit (16 bit presentation)

Measurement error/uncertainty:< ±0.3% (relative to full scale value)

Electrical isolation:500 V (E-bus/field potential)

Current consumption E-bus:typ. 130 mA

Dielectric strength:max. 30 V

Special features:activatable FIR/IIR filters, limit value monitoring

Weight:approx. 30 g

Operating/storage temperature:-25…+60°C/-40…+85°C

Relative humidity:95%, no condensation

EMC immunity/emission:conforms to EN 61000-6-2/EN 61000-6-4

Vibration/shock resistance:conforms to EN 60068-2-6/EN 60068-2-27

Protect. rating/installation pos.:IP20/see documentation

Approvals/markings:CE

Housing data Beckhoff EJ3068 EtherCAT plug-in module

Design form:EtherCAT I/O plug-in module

Material:polycarbonate

Installation:on signal distribution board

Mechanical coding:EJ plug-in module: signal-specific coding pins on the housing,

signal distribution board: holes in the printed circuit board

Locking:latching lug in circuit board cut-out

Connection method:field wiring: application-specific wiring level on the signal distribution board,

EJ plug-in module: 2 x 20-pin socket strip

Dimensions (W x H x D):12 mm x 66 mm x 55 mm